Nvr ows

F

frankge973

n3wb
Oct 12, 2016
9
0
Hello, I purchased an NVR branded OWS.
It has only one ethernet port and can support up to 4 ip cameras.
but I'm not able to add them.
I've setup the network and static IP of NVR but in the list of IPC, there is a button Search ... and it doesn't find them.
There is not a Manual add ... button.
They NVR is correctly connected to newtork.
What can I do?
 
How are you powering them ? the nvr supports 4 but, you don't mention a POE switch that you would run the cameras off of.
 
without poe. each camera is already working .... with their power supply... I only changed the system with which I record the images . Before-> with a dedicated computer, now with nvr
 
I've setup the network and static IP of NVR but in the list of IPC, there is a button Search ... and it doesn't find them.
There is not a Manual add ... button.
Click to expand...
For an uniknown NVR - maybe a screenshot of the camera configuration page would help provide some responses.
Did the NVR come with a user manual?
 
The first pic is the webform used to specify the camera network addresses.
Have you seen this post: https://www.ipcamtalk.com/showthrea...owsoo-branded)?p=131423&viewfull=1#post131423
I'm putting together (my first) system using wireless IP cameras and a cheap generic chinese NVR labelled "Owsoo".

Its displaying the streams from all the cameras and recording them to the HD i put in, so thats fine. But the web interface is horrible, and i wanted to try to upgrade the firmware to see if its been improved. It would also be really nice to be able to access the HD contents via FTP or Samba.
Click to expand...
Perhaps @MuzzleVelocity has the same NVR and the same interface and could comment.
 
Last edited by a moderator:
You must log in or register to reply here.
Top Bottom