New Dahua DVR and camera

[hootie]

Hi, Guys

Could someone lead me in the right direction I just purchased a Dahua HCVR7816S 1080P 16 Channel tribrid DVR and Dahua IP Mini PTZ SD22204T-GN I'm not sure how to hook up the camera to the DVR. The camera has RJ45 connector and the DVR has BNC connector Do I need to purchase a POE switch?

Thanks, Jim

 

[nayr]

uh, you need to send that 'NVR' back.. its not a NVR, you got an HDCVI recorder, its HD Video over analouge BNC.. its not IP Based.

 

[hootie]

I checked the specs again it states it is a tribrid HDCVI & Analog & IP but the manual sucks

 

[nayr]

ah, well put it on a network, same with the cameras and see if they detect eachother.. you'll proabibly have to configure each device individually for your network configuration.

 

[pal251]

Tribrid does IP cameras also. If its anything like the analog plus IP Dahua NVR I setup the total fps sucks.

 

[fenderman]

Send it back. You overpaid and purchased very limited hardware. Unless you intend to use analog cams, this is a very poor choice. [FONT=segoe_uiregular]Support 16ch 1080P/720P IP Camera

[/FONT]

 

[nayr]

yeah my 4216-4k supports all resolutions basically, and h265 for ~$250

 

[mando209]

yeah my 4216-4k supports all resolutions basically, and h265 for ~$250

Link on where u bought it?


Sent from my iPhone using Tapatalk

 

[nayr]

I purchased mine from Aliexpress, you can get them in the US via Amazon and other vendors now too.. it was a pretty new model when i picked up mine and that forced me to Ali.. but this is the one I used: http://www.aliexpress.com/item/DHAU...Model-with-Onvif-2-4-Support/32302197121.html