This is the part of my overall system witch is located in my marketing building.
Now complete, I hope.
The rack frame is lagged to the wall frame, and the depth is adjustable. Both sides have hinges so the Individual devices can swing out from either side. This assembly contains the following:
Modem - Netgear Cm500
Secondary Switch - Netgear ProSafe GS510TP
Keystone Patch panel -
PDU (w/surge protection) - CyberPower CPS-1215RMS
I also put ventilated shelves on the top and bottom to capture excess cable and power cords. This assemble is a system node that interfaces 3 cameras, one WiFi access point, the cable (Comcast) connection, and the fiber, (OM4), trunk line connection to my primary switch in another building. The yellow and red cables hanging from the patch panel are charge cords.
Now complete, I hope.
The rack frame is lagged to the wall frame, and the depth is adjustable. Both sides have hinges so the Individual devices can swing out from either side. This assembly contains the following:
Modem - Netgear Cm500
Secondary Switch - Netgear ProSafe GS510TP
Keystone Patch panel -
PDU (w/surge protection) - CyberPower CPS-1215RMS
I also put ventilated shelves on the top and bottom to capture excess cable and power cords. This assemble is a system node that interfaces 3 cameras, one WiFi access point, the cable (Comcast) connection, and the fiber, (OM4), trunk line connection to my primary switch in another building. The yellow and red cables hanging from the patch panel are charge cords.
Last edited:
As an eBay Associate IPCamTalk earns from qualifying purchases.
As an Amazon Associate IPCamTalk earns from qualifying purchases.
