Hi all, my Dahua IPC-HDW4433C-A(bought Feb/2018) died, I removed the power for 24 hours connect back did not work, I can not ping the camera, I can not see on my router, so do you guys have any advice?
Hi all, my Dahua IPC-HDW4433C-A(bought Feb/2018) died, I removed the power for 24 hours connect back did not work, I can not ping the camera, I can not see on my router, so do you guys have any advice?
I have this one and i am pleased with it, great price and has a microphone. All the settings are factory and i have added brighter lighting to help night time video.IPC-T2431T-AS, this is good to go!
I have this one and i am pleased with it, great price and has a microphone. All the settings are factory and i have added brighter lighting to help night time video.
Bigredfish did a review on this model.
REVIEW: Budget 4MP Turret Comparison - IPC-T2431T-AS vs Chinese HDW4433C-A
Many folks on a budget tend to grab Chinese region cameras off of Amazon because, well they're less expensive, and some simply arent up to speed on the lack of firmware support and other issues. One of the most popular of these Chinese region models is the 4433C-A, a 4MP turret. The 4433C-A...ipcamtalk.com
Amazon.com: Loryta IPC-T2431T-AS 4MP WDR IR Eyeball Network Camera 3.6mm Fixed Lens English Version: Home Improvement
Buy Loryta IPC-T2431T-AS 4MP WDR IR Eyeball Network Camera 3.6mm Fixed Lens English Version: Dome Cameras - Amazon.com ✓ FREE DELIVERY possible on eligible purchaseswww.amazon.com
That's the best solution there is! Congrats!Sorry, I forgot to post the solution here, I do not know what happened but I have IP conflict, I remove the camera open a case, reset and start the setup again, work well.
Yes, I am having low IR light , blinking , any solution?Hi @emersonvier
Does the IR leds turn on in low light conditions?
How does the RJ45 connectors look?
Try powering it from the barrel power connector. ( if you have an appropriate AC/DC adapter )
Nope, I never update the firmware on this camera.Did you do a firmware update recently?
Nope, not touched anything. Suddenly this issue started.Did you do a firmware update recently?