[FONT=arial, sans-serif]I just got a new pc, with windows 10. I have the cd with version 3, so used it to download it to new pc. it doesnt recognize the camera, nor is it in the drop down list. I cant manually put it in either. I export camera from old pc and put info on new, still no recognition . can anyone help me?[/FONT]
my camera t907. program says invalid device name
- Thread starter shellroc2
- Start date
fenderman
Staff member
- Mar 9, 2014
- 36,892
- 21,407
Dont use the disc, you are installing a very old version without the updates. Download the full and latest 3.66 from the website. scroll to the bottom . http://blueirissoftware.com/updates/
I would strongly suggest, that before doing this and wasting time dealing with v3, you upgrade to version 4 as is has many new features and is only 30 dollars for the upgrade
fenderman
Staff member
- Mar 9, 2014
- 36,892
- 21,407
Version 4 will be demo until you buy a new v4 license.
What is your camera BRAND and MODEL
fenderman
Staff member
- Mar 9, 2014
- 36,892
- 21,407
No you did not buy them from blue iris. Blue iris is a software package and does not sell any cameras. You need to know the camera BRAND to find it on the list. Look at the camera what does it say on the camera. Google shows no result of a t907 ip camera.
You can try this https://www.ipcamtalk.com/showthrea...amera-to-BI-that-is-not-in-the-drop-down-list
I tried the link you posted.. it didnt work...this all sounds like "Im doing something wrong".. but, believe me,, I try every and anything..Im a push button fool.. LOL
I also have a separate disk with BI usb driver.. thats what I use for my vista pc.. it works fine...
I also have a separate disk with BI usb driver.. thats what I use for my vista pc.. it works fine...
fenderman
Staff member
- Mar 9, 2014
- 36,892
- 21,407
Are you using an analog camera with a USB capture card? if so forget it, it likely does not have a windows 10 driver. Time to upgrade to IP cameras.
sorry, but this is where you loose me.. dont know what a usb capture card is.. all I know is the cameras work with vista...so, Im guessing you're telling me, that, I have an analog camera, hence, camguard usb, etc... vision "capture"???? did you see the previous post about the camera info???
fenderman
Staff member
- Mar 9, 2014
- 36,892
- 21,407
Does the camera connect to the pc by usb? or you connect the camera to the capture card then the card to the pc?
Take a picture.
I connect the camera from the receiver box, via USB. correction>>>> the camera is connected to wall outlet.. the receiver is connected from wall to pc via usb
fenderman
Staff member
- Mar 9, 2014
- 36,892
- 21,407
post a picture
sounds like an analog camera and usb capture. Dont waste time with it. Undrestand that this is not a blue iris issue but rather a driver issue with your capture card and windows 10 and/or 32 bit vs 64bit. You can try installing the vista driver in compatibly mode, but i doubt it will work.