I bought the Dahua VCS-SH30 PoE speaker from @EMPIRETECANDY a while back and finally got around to mounting it outside.
For pole mounting I used the PK-088 kit from Polycase.
The speaker has 512MB internal memory and supports expansion via MicroSD slot. I installed a Samsung Pro Plus 128GB MicroSD and the full capacity is recognized.
Speaker amp power is 15W, which is plenty loud for my use.
The SIP protocol support is pretty useless (to me) as it limits you to 8KHz audio (G.711 codec).
Best audio quality is achieved by uploading MP3s to the speaker and playing from storage.
Here's a python script you can use to upload and play MP3s.
If anyone from Dahua is reading this: please open source the firmware so we can add support for a modern streaming protocol like AirPlay.

View attachment speaker.mp4
For pole mounting I used the PK-088 kit from Polycase.
The speaker has 512MB internal memory and supports expansion via MicroSD slot. I installed a Samsung Pro Plus 128GB MicroSD and the full capacity is recognized.
Speaker amp power is 15W, which is plenty loud for my use.
The SIP protocol support is pretty useless (to me) as it limits you to 8KHz audio (G.711 codec).
Best audio quality is achieved by uploading MP3s to the speaker and playing from storage.
Here's a python script you can use to upload and play MP3s.
If anyone from Dahua is reading this: please open source the firmware so we can add support for a modern streaming protocol like AirPlay.

View attachment speaker.mp4
Last edited: