alastairstevenson
Staff member
It looks to me like the arm on the 2nd gen is the same as on the 1st gen. I couldn't see any way to get all of the pigtail inside the arm on my 1st gen, so I decided to mount it on this junction box. http://www.amazon.com/gp/product/B00E0H7HFK
My gen 1 has the alarm and audio connectors, and I just couldn't see any way. Have you been able to stuff those additional connectors into the arm?
Just got my camera delivered. I'll post some pictures later.
I can get to it on the network and change settings logged in via IE and verified I am getting a picture ---
I had to get a box to mount this injector which could only fit diagonally
BTW, loving v2 even more. Yes, there are bugs in the firmware, but improved design and better IQ make up for it.
Did you try it on Safari, or Firefox on OS X? Any response from the camera?
No, POE is dead, I bought this to solve the issue:
http://www.amazon.com/iCreatin-ethe...454628506&sr=8-2&keywords=poe+active+splitter
there is a thread discussing LPR, v2 will work the same and only slightly better in terms of IQ:Desperately need to know if 2nd Gen does LPR Car Number Plate recognition.
Can anyone confirm?
Desperately need to know if 2nd Gen does LPR Car Number Plate recognition.
Can anyone confirm?
Is anyone else experiencing lag with this camera.
Regardless of what settings I use, I get severe lag on this camera, that makes the PTZ unusable ( it moves past where you want it to, by the time you realise )
The camera is connected directly to the same NVR as all my other cameras which are working perfectly.
Tiny