Many cores or greater speed, which is more important?

Sparkey

Pulling my weight
Joined
Apr 3, 2015
Messages
237
Reaction score
159
I currently have BI running on a server with a i7 4790 cpu running at 3.6GHz and 16GB of ram. 11 cams.

I have available a dual processor server running 2 E5 2620's running at 2.00GHz. 24 cores total. 64GB of ram. I also have a couple of E5 2670's available I could drop in which would boost it up to 32 cores and 2.6GHz.

I plan to add a couple more cams so would it be worthwhile to transfer BI to the second server even tho the cpu speed is lower?

TIA
 

mat200

IPCT Contributor
Joined
Jan 17, 2017
Messages
14,017
Reaction score
23,349
I currently have BI running on a server with a i7 4790 cpu running at 3.6GHz and 16GB of ram. 11 cams.

I have available a dual processor server running 2 E5 2620's running at 2.00GHz. 24 cores total. 64GB of ram. I also have a couple of E5 2670's available I could drop in which would boost it up to 32 cores and 2.6GHz.

I plan to add a couple more cams so would it be worthwhile to transfer BI to the second server even tho the cpu speed is lower?

TIA
Hi @Sparkey

There's more than Hz or cores to this evaluation .. you need to see how well the cpus support H264/H265 encoding for example ..

In general, newer generations of chips = better ..
 

wittaj

IPCT Contributor
Joined
Apr 28, 2019
Messages
25,185
Reaction score
49,075
Location
USA
What is your current CPU%?

If you have done every optimization in the wiki (substreams and direct to disc is a must), then your CPU should be sub 10% and no real reason then to update for the sake of updating...

A member here runs that same processor with 50 cams at sub 30% CPU.
 

Sparkey

Pulling my weight
Joined
Apr 3, 2015
Messages
237
Reaction score
159
CPU usage is at 33% so I'll go read the wiki. I was thinking the power draw would be considerably higher with the dually system.
 

bradner

Getting comfortable
Joined
Aug 15, 2019
Messages
426
Reaction score
757
Location
PNW
i5-4590 @ 3.3GHz, 16GB RAM, onboard video running 34 cams fine at 70-85% CPU usage. ~20,700kB/s 250 MP/s.

Your system is stronger than mine. I've tried optimizing up the ying yang and have just accepted my CPU usage.
 

Freubel

Getting the hang of it
Joined
Apr 20, 2018
Messages
79
Reaction score
40
Location
Volendam
i5-6500 3.2 16GB memory but running @ 1.30 in general with 6 camera's. I think that's pretty efficient.
 
Top