Loryta SD49225XA-HNR Poe+ Recommendation

S

Scooby7274

Getting the hang of it
Aug 16, 2014
226
84
NC
Wanted to see what POE+ you guys are using. Will any POE+ switch work or are there a certain brand/model that I should look at?
Camera will be around 30-50ft from the BI PC.
 
I am using a cheap one with no issue. Others will probably be brand loyal.

Key is to make sure that the switch has enough wattage capacity for everything you are running - that is the biggest issue.
 
wittaj said:
I am using a cheap one with no issue. Others will probably be brand loyal.

Key is to make sure that the switch has enough wattage capacity for everything you are running - that is the biggest issue.
Click to expand...
What ya using?
 
I used this injector at first as I didn't have a POE+ switch.

Amazon.com: PoE Injector Adapter, PoE+ Injector 30W 10/100/1000Mbps IEEE 802.3af Compliant, Up to 100 Meters (325 Feet): Electronics

Buy PoE Injector Adapter, PoE+ Injector 30W 10/100/1000Mbps IEEE 802.3af Compliant, Up to 100 Meters (325 Feet): Powerline Network Adapters - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com

And then since cameras multiply like rabbits, that injector is now used for testing purposes LOL and went to this switch (s) LOL:

Amazon.com: Aumox 8 Port Gigabit POE Switch, 8 Port POE 120W, Gigabit Ethernet Unmanaged Network Switch, Plug and Play, Sturdy Metal Housing, Traffic Optimization (SG308P): Electronics

Amazon.com: Aumox 8 Port Gigabit POE Switch, 8 Port POE 120W, Gigabit Ethernet Unmanaged Network Switch, Plug and Play, Sturdy Metal Housing, Traffic Optimization (SG308P): Electronics
www.amazon.com
 
As an Amazon Associate IPCamTalk earns from qualifying purchases.
  • Like
Reactions: Broachoski
I actually use an Aumox gigabit switch. Has served me well. No issues sonce it doesn't have POE+?
 
Check which one you have - they do not call it POE+ but shows it meets at standard which is POE+, but it is, at least this one is:

Supports IEEE802.3af/at standard,8 gigabit Ethernet ports, each port up to 30W power supply, with 120W power in total. comprehensive optimization of product performance.

Just make sure a port can support 30W and you will be fine.
 
wittaj said:
Check which one you have - they do not call it POE+ but shows it meets at standard which is POE+, but it is, at least this one is:

Supports IEEE802.3af/at standard,8 gigabit Ethernet ports, each port up to 30W power supply, with 120W power in total. comprehensive optimization of product performance.

Just make sure a port can support 30W and you will be fine.
Click to expand...
Gotcha. Since you use it and have no issues,I'll grab one of those. Thanks for the info,appreciate it.
 
  • Like
Reactions: EMPIRETECANDY
I plan on mounting it under an eave that has line of sight to the front door,carport,and the yard. Is mounting it straight to it the eave the way to go or are there a bracket for such?
 
It comes with a wall mount, but you can get a ceiling mount if that works for your install. You can even get a corner mount.
 
  • Like
Reactions: Scooby7274
What's the distance from the mount to the bottom of the Camera? I plan on mounting it under and eave,but I'm afraid that it may hang to low.
 
You must log in or register to reply here.
Top Bottom