I’ll try that tonight when it’s dark again. These are the ColorVu version so no IR night setting. I’ll see how 1/60th does for getting a good picture at night and if it solves the LED flickering.To eliminate motion blur, exposure should be no less than 1/60s.
This suggests that the 'Virtual Host' facility is not enabled.The website says there should be a URL under the "connect" column (in my last screenshot), but mine is blank.
Actually, the LEDs turn on/off twice during a 60Hz cycle. Which makes them flicker at 120Hz.The LED lights are flashing 60 times a second. Setting exposure to 60 will only increase the flashing effect.
Hey! Incredible kudos to you. I did not have the virtual host option set. This now lets me into the camera GUI which unlocks a lot more options and I have found the 50/60 Hz option! I can also control white balance now, which is great because the new string lights turned the picture super warm/orange. Can’t wait to give it a try tonight.This suggests that the 'Virtual Host' facility is not enabled.
The tickbox to enable it is in the NVR web GUI under Network | Advanced Settings | Other tab.