Junction box in black for Dahua 5231R-ZE???

[dastrix]

HI All

Does anyone know if this is a) available and b) would fit? I need to wall mount one of these cameras on brick and can't get the camera cables into the wall, will need to use conduit.

Thanks!

https://dahuawiki.com/Accessories/Mounts/DH_PFA139_B

 

[harrijs]

I just recently went through this for some installations that were against a brown/bronze trim. I ended up just getting some high temp/outdoor rated rattle cans and prepped the boxes and cameras before installation. Takes a little bit to mask everything off on the camera, but the finished product worked well.

 

[EMPIRETECANDY]

PFA137 can work on the vertical wall no problem.

 

[johz]

Not sure about the PFA139 you refer to, but the PFA137 would definitely fit a 5231-ZE and Andy has them in black.

 

[EMPIRETECANDY]

IPC-HDW5231R-ZE can be supported by

pfa137 junction box
https://www.amazon.com/EmpireTech-P...irect=true&s=merchant-items&slotNum=0&sr=1-20
PFB203W wall mount
https://www.amazon.com/EmpireTech-B...irect=true&s=merchant-items&slotNum=0&sr=1-23

 

[dastrix]

Thanks guys! and Andy

 

[ThomasPI]

Saved for future needs and ordering.

 

[mat200]

pfa137 junction box
https://www.amazon.com/EmpireTech-P...irect=true&s=merchant-items&slotNum=0&sr=1-20
PFB203W wall mount
https://www.amazon.com/EmpireTech-B...irect=true&s=merchant-items&slotNum=0&sr=1-23

Paint works well to have the various junction boxes match the wall / trim better.

Additional notes:

1) Remember PFA137 and PFA139 fit different turret cameras ( those with 3 screw bases )
2) PFA130E should also work for turrets which have 3 screws on the base.
3) PFB203W and PFB204W also work for the respective turrets with 3 screw bases. HOWEVER, they are not junction boxes and thus do not have the appropriate holes for 1/2" conduit.

Some new turrets are coming with 4 screw bases ( see some of the starlight+ 4MP turret reviews ). So that sort of messes with my planned upgrade for a camera position or 2. argh...

There are also squarish junction boxes, such as the PFA121 which are typically combined with the 4 screw base cameras. There is a model of that for 3 screw based cameras - and will work with the 3 screw based turrets ( Lorex carries 3 colors of each - and at times they will have a 25% OFF discount code.. normally only 10-15% off, but during big sale times they even do free shipping and 25% off.. like around BF-cyberweek )