Ivs setup question

S

sdiamond808

Getting the hang of it
Jul 2, 2017
118
14
First off everything I have learned over the past 2 months is amazing. I've had cams since 2016 and they were basically worthless compared to how you all helped me dial them in.

Recommended in another post I removed the default gateway on all my cams and deleted port forwarding so I'm only connected to lan, any mobile viewing dine through a VPN.

I set up Ivs to detect motor vehicles driving by but it only gives me the option to send email or push notification. I have no clue how it could push to my phone since there is no spot for my number and I'm assuming since it's no longer connected to internet it can't send emails.

I have a 256gb sd card on the cam. Can I somehow snapshot the event to the SD card? Don't know how else to track this.
 
  • Like
Reactions: Broachoski
Are you running an NVR or software such as BlueIris? Or are you only storing to the SD cards in the cams?

A description of your network is the only way we can help you here.
 
  • Like
Reactions: JDreaming
Not familiar with HiK NVRs but typically using Dahua you would need to enable their P2P on the NVR which would send you the push notifications. It wouldn’t require manually port forwarding but NVR would need WAN access as it would for email..the cameras themselves could/would remain blocked from the internet
 
  • Like
Reactions: JDreaming and samplenhold
By default many Dahua cams are setup to record a snapshot with motion IVS triggers.

You would have to get into the camera GUI and see if that is still happening or if being hooked to a Hik NVR if that turned it off.

But it is a simple check the box for a snapshot for IVS triggers.

1694260605488.png
 
  • Like
Reactions: JDreaming and bigredfish
wittaj said:
By default many Dahua cams are setup to record a snapshot with motion IVS triggers.

You would have to get into the camera GUI and see if that is still happening or if being hooked to a Hik NVR if that turned it off.

But it is a simple check the box for a snapshot for IVS triggers.

View attachment 171889
Click to expand...
And that snapshot would be on the SD card on the camera? I don't have the nvr connected to wan. Took all that down after reading posts here.
 
  • Like
Reactions: JDreaming
wittaj said:
By default many Dahua cams are setup to record a snapshot with motion IVS triggers.

You would have to get into the camera GUI and see if that is still happening or if being hooked to a Hik NVR if that turned it off.

But it is a simple check the box for a snapshot for IVS triggers.

View attachment 171889
Click to expand...
So I have it setup for snapshot now. Question chose ivs, fast moving, motor vehicle. As far as the graphics go, do I just draw a big square in the whole frame?
 
Just do IVS for human and/or vehicle.

It is best to not box the entire field of view but rather leave a little room around all the sides for an intrusion box so the camera has time to see the object first.
 
  • Like
Reactions: JDreaming
wittaj said:
Just do IVS for human and/or vehicle.

It is best to not box the entire field of view but rather leave a little room around all the sides for an intrusion box so the camera has time to see the object first.
Click to expand...
I'll set that now. Is there any kind of setup guide for this stuff? The web 5.0 manual didn't really detail it enough for me
 
wittaj said:
Just do IVS for human and/or vehicle.

It is best to not box the entire field of view but rather leave a little room around all the sides for an intrusion box so the camera has time to see the object first.
Click to expand...
Maybe a dumb question but where do I view the pictures on the SD card? I can't find them anywhere
 
You must log in or register to reply here.
Top Bottom