IVS setup help

Ok, I am downloading SmartPSS to play with it. However, I still don't have IVS events being triggered. I seem to have the opposite effect. I am checking the live stream directly from the camera and there are not lines. I have setup a tripwire setting and I believe I have it set right but I cannot get it to trigger.

upload_2017-1-12_13-41-33.png
 
nobody can cross that line.. try vertical one on the door
 
Katodude said:
Ok, I am downloading SmartPSS to play with it. However, I still don't have IVS events being triggered. I seem to have the opposite effect. I am checking the live stream directly from the camera and there are not lines. I have setup a tripwire setting and I believe I have it set right but I cannot get it to trigger.

View attachment 13965
Click to expand...

Did you setup the working period?
 
The default working period is always. I double checked it and saved it again. I drew a bunch of vertical lines up and down the door. I also added a box around the door for Intrusion detection. Also when I go to the Live view on the camera or on PSS I do not see the lines that I have drawn in the IVS. It seems like everyone else sees them in their Live view.
This must be a setting that I am missing somewhere. I have tried this with 2 cameras and the result is the same.
 
Last edited:
I've not had any luck with the IVS function. I can draw the line using IE (trip wire) yellow line but when I select save the line disappears and is no longer viable on the setup screen or live view.

Software Version2.460.0000.1.R, Build Date: 2016-10-25
 
I think I figured it out, just wasnt clicking the mouse correctly at the end and getting the drawing completed. Now I just have to figure out the target filter min/max settings
 
by default IVS max object is the full frame, when you click on it you'll see a blue outline.. you can either click on that blue outline and resize it smaller, or hit clear and draw a new max size.. then click on min and draw another box somewhere for minimum size.
 
hi there
im using hik vision 4 channel dvr
problem is that i forget the email witch i register for online
now kindly help me to solve this matter
thanks
reg
jabir
 
You might have better luck posting in the hikvision area.
This thread was specific to Dahua, and read by Dahua users
 
Ok, got one browser to work. Have to use IE and not Edge. The icons look the same so I thought i was on it. Then you have to go into windows settings display and not scale and say 100% and it works. Can not get this to work on any Mac browser. You must have Windows.
 
Hi all,

not wanting to hijack this topic, but I got a related IVS question:
- if a Dahua cam, with IVS features, is connected and configured by a Dahua NVR. If you configure IVS on the NVR, I assume these configurations will be pushed towards the CAM. But then: will the camera send "IVS events" to the NVR, or will the NVR perform the "intelligence" on the image stream or not?
- retake of the previous use case: imagine you connect an ONVIF compatible camera to that same NVR. Can you still configure IVS features for that video stream (like trip wire/line detection/...) ? I understand the camera will 24/7 dump the videostream towards the NVR (whereas in use case 1, the camera might only send "detected video stream").

Who knows how this IVS thing really works?

Thanks!
CM

-- gentle bump of my question
 
Last edited:
catcamstar said:
Hi all,

not wanting to hijack this topic, but I got a related IVS question:
- if a Dahua cam, with IVS features, is connected and configured by a Dahua NVR. If you configure IVS on the NVR, I assume these configurations will be pushed towards the CAM. But then: will the camera send "IVS events" to the NVR, or will the NVR perform the "intelligence" on the image stream or not?
- retake of the previous use case: imagine you connect an ONVIF compatible camera to that same NVR. Can you still configure IVS features for that video stream (like trip wire/line detection/...) ? I understand the camera will 24/7 dump the videostream towards the NVR (whereas in use case 1, the camera might only send "detected video stream").

Who knows how this IVS thing really works?

Thanks!
Click to expand...
Hello, gentle bump of this NVR-IVS question. Thank you for your support!
 
@catcamstar with dahua cams my nvr pushes the ivs to the cam (can see directly thru the cam web page) but the nvr will let me do ivs with other manufacturers so those must work thru the nvr.
 
jaycanter said:
@catcamstar with dahua cams my nvr pushes the ivs to the cam (can see directly thru the cam web page) but the nvr will let me do ivs with other manufacturers so those must work thru the nvr.
Click to expand...

Thanks for your replay @jaycanter !
Unfortunately, with lots of google, I arrive at a 2-1 in favor of IVS-possible-on-NVR-with-non-IVS-camera - you and this guy are positive that is works: New lite H.265 cams release and Tesla Series XVR from dahua however the next poster states it is not possible: New lite H.265 cams release and Tesla Series XVR from dahua
It sounds "logic" that IVS is like "events" passed on from camera to NVR to facilitate "video stream logging", yet if you read the documentation of the NVR52xx, it states: "The NVR provides optional standard intelligence at the edge allowing detecting of multiple object behaviors such as abandoned or missing objects, Trip wire analysis ... counting ... face recognition ... "
Maybe my English is rubbish, but it sounds to me that the NVR (not the cameraside IVS) is doing all these "optional standard" things! Even on a non-IVS camera (eg. standard onvif camera).
Who knows the exact thruth of IVS capabilities with together with a Dahua cam without IVS.
Thanks!
 
Dont Really now How it works eather.

But my ip cams has IVS, but my NVR dont have IVS (anymore,after firmware update dont get it NVR4208)
So i cant get the push messages from iDMSS, so has to be the cameras who push the IVS throug the NVR.

Get so many false alarms on motion detection. Should Really never have updatet det NVR. Sucks.
 
you can move back to the old one~
 
You must log in or register to reply here.
Top Bottom