IPC-Color4K-T180 mounting question?

[aMike101]

I got my IPC-PDW5849-A180-E2-ASTE or IPC-Color4K-T180 the other day.

I installed the base mounting plate that uses 3 screws to my junction box then there is the ring part that holds the camera in place with set security screw is that the only thing that holds the turret/eye ball in?

In the picture below it looks like you put the back in first then the front and set the screw.

 

[looney2ns]

Yes, that is correct. Don't overtighten the front screw.

 

[wittaj]

That is correct.

And depending on the angle you put the camera, you may need to apply a little pressure to keep the ring in place until you tighten the security screw. And then always do a little tug on it to make sure the backend actually locked.

And do not overtighten the security screw.