Hi, I got dahua nvr5216-4ks2 and some cheap old model cameras w/ microphone but no speakers (DH-IPC-HDW2230T-AS-S2). How can I run some recording to act as deterrent like when motion detection is triggered ?
So far, I googled and searched:
** A. is my understanding of these options correct ?
option1. Buy dahua camera w/ speaker (Is it possible to configure the nvr to cause the new camera w/ speaker to run a recording when any of the cameras are triggered ?)
option2. There are wire connectors that close in the nvr acting as switches when alarms are triggered. But these will require some hardware wiring to some other device that will generate sound and maybe require running an rca cable from the device to an external speaker ?
option3. Buy poe speaker (?) do i need to run RCA cable or will the sound be transmitted through the cat6 cables? So far, I only see expensive ones (from dahua and netgenium) but still unsure how they work. I was told Netgenium can run a recording by sending a request via http to its ip address, or by triggering a contact input (maybe this contact input is the device to be connected to the nvr in #2 ?).
option4. get camera w/ speaker, a computer and run blue iris.
** B. Do you have any specific recommended options / procedures / camera / speaker device ?
Thanks!
Regards,
Gilbert
So far, I googled and searched:
** A. is my understanding of these options correct ?
option1. Buy dahua camera w/ speaker (Is it possible to configure the nvr to cause the new camera w/ speaker to run a recording when any of the cameras are triggered ?)
option2. There are wire connectors that close in the nvr acting as switches when alarms are triggered. But these will require some hardware wiring to some other device that will generate sound and maybe require running an rca cable from the device to an external speaker ?
option3. Buy poe speaker (?) do i need to run RCA cable or will the sound be transmitted through the cat6 cables? So far, I only see expensive ones (from dahua and netgenium) but still unsure how they work. I was told Netgenium can run a recording by sending a request via http to its ip address, or by triggering a contact input (maybe this contact input is the device to be connected to the nvr in #2 ?).
option4. get camera w/ speaker, a computer and run blue iris.
** B. Do you have any specific recommended options / procedures / camera / speaker device ?
Thanks!
Regards,
Gilbert