How enable Onvif on a old Hikvision camera?

figge4

figge4

n3wb
Feb 14, 2022
22
4
Sweden
Please someone try to explain in an easy step-by-step way as I’m lost when it comes to Hikvision.

I have a customer that wants his DS-2CD752MF-E integrated in a system of a noname NVR.

I can reach the cameras IP but not through Onvif. I guess Onvif is turned off as it has worked with a Hikvision NVR before.

Probably I have to reset the camera also as the customer dont know the login…

what tools do I need? I have a test-instrument with a Hikvision tool integrated but it wont find the camera so I suppose an approach with PC software or browser interface is my way to go?

03439E9C-E464-4292-8722-B4355BDD6599.jpeg
 
figge4 said:
I can reach the cameras IP but not through Onvif. I guess Onvif is turned off as it has worked with a Hikvision NVR before.
Click to expand...
The device specs don't mention that ONVIF is supported - it may be too old a model for that capability.

figge4 said:
I have a test-instrument with a Hikvision tool integrated but it wont find the camera
Click to expand...
Have you tried Hikvision's SADP tool on a Windows PC?
It will find Hikvision devices even when they are on a different IP subnet.
 
Looking on a two sites so far, both sites do not mention ONVIF.
Not even RTSP in the supported protocols.

1652354381985.png
 
If I search the modelname + onvif I get some hits. But I’m not sure either :-/
Hikvision site is not very helpful either.
 
alastairstevenson said:
The device specs don't mention that ONVIF is supported - it may be too old a model for that capability.


Have you tried Hikvision's SADP tool on a Windows PC?
It will find Hikvision devices even when they are on a different IP subnet.
Click to expand...
Yepp

I can edit login credentials, IP nr etc through that one. But cant find any onvif setting. Very few settings actually…
 
You must log in or register to reply here.
Top Bottom