A "reboot script" like this will work with any unit and firmware.
The bad part is that you are down for at least a minute; you can program it to shut down power daily, for example from 4:59 to 5:00, or whatever time suits you.
How would this be a reboot script ? This is a timer that shuts off the NVR and restarts it. Shutting it off this way is a bad idea unless you don't care about possible HDD corruption.
I'm looking for something like this (below) that I can run on my Linux box
curl -X GET -d reboot
When I run this, I get these errors
!DOCTYPE html>
<html><head><title>Document Error: Method Not Allowed</title></head>
<body><h2>Access Error: 405 -- Method Not Allowed</h2>
<p>Method PUT not supported by file handler at this location </p>
</body>
</html>
root@debian:~#
I already have a routine that alerts me when a camera goes offline. I just need a script that will allows me to reboot the NVR so that I can tie it all together...