Firstly, i have checked many threads in fact so many my head is like the matrix right now with information except i am unable to still resolve my issues.
I have the following;
1x NVR DS-7604NI-E1 (PoE)
1x DS-2CD2332-I (2.8mm) (both noted updated to 2335 models with 5.2.5 software)
1x DS-2CD2332-I (4mm)
So my issues are that SADP cannot find either cameras when searching (via my Laptop through wifi running windows 8). SADP will also not find the cameras if in the router direct as well.
If i connect and power (via 12v adapter) to either of the camera to my modem-router i can access the Cameras no issue under the factory IP address or assigned IP address if i change it. Also the NVR can find this if the camera is connected to the router/modem directly and will show a picture no problems.
The issue lays when i reconnect the camera directly to the NVR (which has PoE) it will not find it, i have also tried to have power going to it to try but still nothing is found
The IP set for the NVR is 192.168.1.10 and the cameras following ips over .11 and .12 however still unable to find them.
I have tried the recommended settings and information as posted in other threads such as using manual mode, using factory passwords/login and still the NVR cannot find anything.
I have also tried to change the PORT on the camera itself and update NVR with the same settings and reconnect the cam into the nvr, but still no live feed.
Any help or further information would be much appreciated as i am confused to what the cause could be causing this. - PS. yes first time posting, hoping some wise member will help me with my situation before i go bald! haha.
I have the following;
1x NVR DS-7604NI-E1 (PoE)
1x DS-2CD2332-I (2.8mm) (both noted updated to 2335 models with 5.2.5 software)
1x DS-2CD2332-I (4mm)
So my issues are that SADP cannot find either cameras when searching (via my Laptop through wifi running windows 8). SADP will also not find the cameras if in the router direct as well.
If i connect and power (via 12v adapter) to either of the camera to my modem-router i can access the Cameras no issue under the factory IP address or assigned IP address if i change it. Also the NVR can find this if the camera is connected to the router/modem directly and will show a picture no problems.
The issue lays when i reconnect the camera directly to the NVR (which has PoE) it will not find it, i have also tried to have power going to it to try but still nothing is found
The IP set for the NVR is 192.168.1.10 and the cameras following ips over .11 and .12 however still unable to find them.
I have tried the recommended settings and information as posted in other threads such as using manual mode, using factory passwords/login and still the NVR cannot find anything.
I have also tried to change the PORT on the camera itself and update NVR with the same settings and reconnect the cam into the nvr, but still no live feed.
Any help or further information would be much appreciated as i am confused to what the cause could be causing this. - PS. yes first time posting, hoping some wise member will help me with my situation before i go bald! haha.
Last edited by a moderator: