Defender666
Getting the hang of it
- Dec 19, 2015
- 193
- 25
Change the language back again. It's reversible.
I though you had changed the language of a firmware header, which changes the header checksum, and wanted to get back to the original firmware.I changed the language flag (modify file) in a firmware update file
Maybe I do not understand the problem.
......
What type of camera, what version of firmware?
And what exactly is the problem?
Maybe the Russian one from here might work : http://www.hikvisioneurope.com/port...51231 English & Multi-lingual/Multi language/I need multi language firmware for this NVR and IPC with support for Russian and English languages.
Maybe the Russian one from here might work : http://www.hikvisioneurope.com/port...51231 English & Multi-lingual/Multi language/
Вы не сможете установить русскоязычную прошивку версии выше 3.0.13 в китайский видеорегистратор, не тратьте напрасно время...
Maybe the Russian one from here might work : http://www.hikvisioneurope.com/port...51231 English & Multi-lingual/Multi language/
Dear GSMbox,
I'm also facing same problem. Have you find the solution? Please guide me. But my NVR is DS-7104N-SN/P with V3.0.18 build151231. Please support.
U-Boot 2010.06-153460 (Oct 10 2015 - 18:21:59)
NAND: 128 MiB
Hit Ctrl+u to stop autoboot: 0
HKVS #
Unknown command '' - try 'help'
HKVS #
HKVS # help
? - alias for 'help'
base - print or set address offset
bootss - boot from snapshot image
cmp - memory compare
cp - memory copy
crc32 - checksum calculation
ddr - ddr training function
format - format flash except bootloader area
go - start application at address 'addr'
help - print command description/usage
loadk - load kernel to DRAM
loop - infinite loop on address range
md - memory display
mii - MII utility commands
mm - memory modify (auto-incrementing address)
mtest - simple RAM read/write test
mw - memory write (fill)
nm - memory modify (constant address)
ping - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
reset - Perform RESET of the CPU
saveenv - save environment variables to persistent storage
setenv - set environment variables
update - update digicap.dav
updateb - update bootloader
upf - update firmware, format and update (factory use)
version - print monitor version
HKVS #