Hikvision DS-7616HI-ST Live View not starting all cameras

[jaclarkaus]

When I click on the 'Start all live view' cameras at the bottom of the screen in the web browser, only the active analog cameras start, and I have to go through the IPCameras one at a time, selecting the window, then double-clicking the camera to start it. When I click on "Stop all Cameras' all cameras stop, including the IPCameras.

Any idea how I can get ti to automatically start all cameras?

 

[alastairstevenson]

A bit of a long shot, as I'm not familiar with that DVR, and this setting may already be set, and it's not directly related -
Does the DVR have an 'Automatically start live view' radio button un Local Configuration, and does it change the behaviour if enabled?
And if disabled again, does the partial only start behaviour return?

 

[jaclarkaus]

Found that switch, turn it on so now the Analog cameras start automatically, which is good, but IPCameras still don't.

Any other ideas?

 

[alastairstevenson]

Any other ideas?

Well, that's a pity, but worth trying.
Sorry - no other ideas. Maybe that's just how it works.