Hikvision DS-7608NI-SE/P 4+4

[GPA]

Hi

I'm trying to add camera to D1 to D4 manuel but it don't work.

Camera has been tested with a laptop and work fine so there is nothing wrong with it.

I can't delete D1 to D4 but i can edit it to the correct IP 10.0.0.130 and also enter password - but it don't connect!!!

The camera and NVR has 2 diffrent password, but are in same ip range.

I got other camera on lan working fine - what is wrong?

Pls look at the picture same as my NVR are looking

Jan

 

[alastairstevenson]

I can't delete D1 to D4 but i can edit it to the correct IP 10.0.0.130 and also enter password - but it don't connect!!!

What's the subnet mask for your 10. network and the devices on it?
If it's not 255.0.0.0 then the 10.0.0.130 camera is on a different network segment from the other cameras and the NVR LAN segment and won't be accessible.

 

[GPA]

It's both in same sub

Jan

 

[alastairstevenson]

It's both in same sub

Well, maybe as an experiment, try changing the camera IP address to something in the 10.16.1.x range and see if it adds OK.

 

[GPA]

Hi

I try to add it with 10.0.0.130 no luck on D1
Then i try to add it on 192.168.254.2 say weak password no picture.

What a'm i missing here....

Jan