hikvision 7608

[tim jackson]

hi guys i have the 7680 nvr with 6 cams and have them set on continues recording on the nvr for all cams ,is there a way of searching for motion detection as i only see the blue bar , i have motion detection enabled on all cams also

 

[alastairstevenson]

A few posts on that topic - example :
event alert on nvr

 

[TJ01]

Menu > playback> top left drop down menu for events> then over on top right drop down menu for motion.

Change the pre play to 5secs at the bottom right to speed up going through the motion events.

Hope that helps.