It's not a good idea as each file is different, serial numbers and mac addresscan i somehow download the mtd files from my camera that have english language and put it in to my other camera with chinese language?
there both the [h=1]DS-2CD2132F-IS[/h]model.
thank you
That probably means they were Chinese region cameras (Language=02) but with seller-installed firmware that made the cameras appear to be English (Language=01).cams I did this to already reported language 1 in prtHardInfo, but the mtd files had the 02 and now they're staying 01. What does that say?
Why is this if the USA/China firmwares are the same except the language digit?If you update the camera you have to use Chinese firmware, with the region changed on the firmware with hiktools
to region 1.
No the 5.25 won't go back, but I'm working on it at the moment, there's a lot to change to get the 5.16 ghost firmware to workOK I see the USA firmware is not needed unless I wish to load a language 1 file on it.Ultimately I wish to downgrade to 5.1.6, preferably through the Web interface (the cams are 600 to 900 feet away, on the cameras that will do it. I have some 5.2.0 2032s and some 5.2.5 2332s. So far it seems I have to TFTP to 5.1.6 from 5.2.0. Will the 5.2.5s go back with TFTP also?
Oh OK good to know. The US 5.1.6 is the same as China 5.1.6 from your Dropbox just flip the language with hiktools?No the 5.25 won't go back, but I'm working on it at the moment, there's a lot to change to get the 5.16 ghost firmware to work