whoslooking
IPCT Contributor
But you have not, downgraded it, it was already downgraded by seller?
I think I need to check it out a bit first - when @alexander.omiz tested it for me it didn't work, though I don't yet know the reason why.Can you tell me to send test your modified firmware?
Probably a silly question, but would the reset button on the cam revert it back to the original chinese 5.2.3 that was factory-loaded on the cam? Or does the reset button not completely convert it back to factory condition?Hi guys,
Performed the mtd hack on the 5.3.0 labelled with 5.2.5 loaded. Still booted ok after the mtd hack which was expected.
tried to upgrade the camera the 5.3.0 firmware with the mtd hack still place. The en version loaded but stuck in reboot loop. Chinese version loads but errors flashing the dav_sec area.
you cannot reload the original mtd files as you cannot get back into the camera via any method via telnet, even after the tftp process has completed. At this point, the camera reverts from 192.0.0.64 to 192.168.1.64 and is in the protected environment.
i have access to the camera also via it serial console but there are no commands that work in this protected environment.
if anybody else has any ideas, let me know.
p.s. Camera was purchased for test purposes only,so happy to experiment with it...
Replace the IEfile with a multi-language file, theres a post somewhere in the forum about this.@whoslooking
Hey! I changed it on 4 cameras. It worked great, thanks a lot!
Just 1 question: When i change 02 to 01 i am only able to use english language and not other languages. Which firmware do i have to flash after changing it to 01?
Thank you. Gonna search for it nowReplace the IEfile with a multi-language file, theres a post somewhere in the forum about this.