Help me understand sensor size and type
- Thread starter Rickoo
- Start date
It might not be completely as simple as it looks but there are a lot of good reviews, side-by-sides etc on this forum to draw some good conclusions. Also check out threads by member @wopi82 for more technical details around the sensors themselves. Read the Cliff Notes, packed with good first-hand notes from the contributors on these forums.
Look for sensors as large as you can afford, don't focus as much on total MP, and look for Starvis/Starlight/Darkfighter cameras which are known to do well in the dark (if that's what you need). You will also want to read up on Focal Length and how the aperture the sensor is looking through controls how much actual light makes it to the sensor (also on this site).
Sensors used in Dahua cams
ipcamtalk.com
ipcamtalk.com
ipcamtalk.com
Look for sensors as large as you can afford, don't focus as much on total MP, and look for Starvis/Starlight/Darkfighter cameras which are known to do well in the dark (if that's what you need). You will also want to read up on Focal Length and how the aperture the sensor is looking through controls how much actual light makes it to the sensor (also on this site).
Sensors used in Dahua cams
Periodic Table of Image Sensors
https://www.ptgrey.com/support/downloads/11165 Not all sensors are listed, but it gives a nice overview of sensor types and manufacturers. And it looks cool :D
New Sony starvis 1/1.2" sensor 4k sensor
Just noticed on the CCTV sensor site the imx485lqj. Same pixle size as the imx327. A 4k with the same night power of the 2mp starvis, yes please. Products Image Sensor for Security & Surveillance | Sony Semiconductor Solutions Corporation
Dahua Starlight+
Dahua has released 4mp CVI cameras with the starlight+ designation using 1/1.8" sensors. IP versions probably not far off. https://www.dahuasecurity.com/products/productDetail/28077
mat200
IPCT Contributor
- Jan 17, 2017
- 16,118
- 27,081
Hi @Rickoo
Remember sensor is just one aspect to consider.
For those of us not building camera circuit boards there's a lot more to consider ( lens, f-stop, processing ability and features, compatibility like ONVIF, fps, ... ) - and perhaps the best resource is to look at the reviews the members are doing on cameras which give a better idea of a more whole picture of what the camera can do.
So, all other things being equal, would say at 1/1.8 sensor be "better or worse" than a 1/2.5 and for what reasons?
alastairstevenson
Staff member
Yes, better, - for the same number of pixels (ie resolution) because of a larger area per pixel to accumulate charge from impinging light.
With all other things being equal, such as both being back-illuminated (so tracking and active elements don't obscure the light).