Help identifying generic nvr board

X

xavier00

Getting the hang of it
Jul 31, 2016
103
1
I would like to know if someone can tellme what board is this? I just want to find the right firmware
for it image.jpegi thought it was a nbd- 7808tbut it seems its not, firmware wont work
 
It looks like the serial console port may be the 4 connector holes, just left of D26? in the centre of the board.
If you connect a USB to TTL serial convertor, you may get access to the bootloader or kernel and get some useful information.
 
  • Like
Reactions: xavier00
This is the mistery board being sold all over the place, no brand no firmware no help from sellers
 
it looks like a Chinese made brick to me.
 
** found the location for a 4 pin header on the circuit board. i soldered wires to a TTL-to-serial converter so that I could monitor the console output during the linux bootup.
Click to expand...
I presume you saw the above, on this post:
https://www.ipcamtalk.com/showthrea...owsoo-branded)?p=131423&viewfull=1#post131423
This is easy enough to do:
It looks like the serial console port may be the 4 connector holes, just left of D26? in the centre of the board.
If you connect a USB to TTL serial convertor, you may get access to the bootloader or kernel and get some useful information.
Click to expand...
 
You must log in or register to reply here.
Top Bottom