hello

B

basco

n3wb
Feb 25, 2019
5
0
belgium
Hi all,

what a wealth of knowledge here, great!
i've bought ip cam's to secure my house and keep an eye on the kids.
they are laying on the shelf for a while now....
cheap ass ali dahua knock offs i think (after reading on this forum).. so i regret it, but the money is spent so i have to make the best of this...
i recently bought an poe switch and hooked the cams up.
i will post my questions in relevant forums...
anyway, thanks for your help!
 
Welcome to the forum!

basco said:
cheap ass ali dahua knock offs i think (after reading on this forum).. so i regret it, but the money is spent so i have to make the best of this...
Click to expand...
I bought one of those for a low price on eBay about a year ago.
This is a DH4431C-A-V2 that was offered for £xx on eBay as a 'Spare and repairs' item, apparently :
"Brand new unused but faulty.
Briefly appears on the network then disappears."
Click to expand...
It was bootlooping, presumably after a firmware update. Confirmed after accessing the system log after I'd fixed it up ...
But a 'reset to defaults' fixed it, and I was actually quite impressed with the video quality, and the functionality.
I swapped out a Hikvision 3MP turret camera in favour of this.
 
  • Like
Reactions: Mike
ok, so maybe these aren't that bad after all...
it says: IPC-HDW4431C-A-V2 in the version info screen....
i thought i read on this forum (somewhere) that by definition a "IPC-HDW4431C-A-V2" is not a true dahua product...
 
Hello, welcome to the forum.
 
basco said:
ok, so maybe these aren't that bad after all...
it says: IPC-HDW4431C-A-V2 in the version info screen....
i thought i read on this forum (somewhere) that by definition a "IPC-HDW4431C-A-V2" is not a true dahua product...
Click to expand...

Those cam's are made for China Region sales, in some case's they use less expensive parts. And almost always the firmware has been hacked from chinese to the language you purchased. Typically, it is not advisable to upgrade the firmware. But they are Dahua.
 
  • Like
Reactions: Mike
Ok thanks, i'll just use'em as is.
So i have the POE version of this camera.
I noticed they are getting a bit warm, even with IR off.
Could that have something to do with the cheaper parts? Or is there a heating element to prevent frost that i can eliminate?

Thanks!
 
basco said:
Ok thanks, i'll just use'em as is.
So i have the POE version of this camera.
I noticed they are getting a bit warm, even with IR off.
Could that have something to do with the cheaper parts? Or is there a heating element to prevent frost that i can eliminate?

Thanks!
Click to expand...
They all run warm.
 
You must log in or register to reply here.
Top Bottom