Hello people!

rwsstudios

n3wb
Joined
Dec 6, 2021
Messages
21
Reaction score
20
Location
Washington state
Good morning, my name is Monte, just wanted to say hi. I'm joining this forum because I'm sick and tired of typing stuff like "best IP cams" into google and getting a web page filled with camera manufacturers sponsoring the page. So I figured, lets talk to some folks on some forums!

I have a background in automation so if anyone wants to DM me go for it, I'll do my best to help. But my forte is not with arduinos, it's with PLC's...specifically Allen-Bradley, but all ladder logic should translate. I also have a bit of electrical engineering background, as well as computer science.

thanks for reading, take care guys!
 

sebastiantombs

Known around here
Joined
Dec 28, 2019
Messages
11,511
Reaction score
27,696
Location
New Jersey
:welcome:

Just a few quick notes that you may find helpful.


Start out by looking in the WiKi in the blue bar at the top of the page. There's a ton of very useful information in there and it needs to be viewed on a computer, not a phone or tablet. The Cliff Notes will be of particular interest although the camera models listed there are a generation old at this point. The best way to determine what kind of camera you need in each location and where each location should really be is to buy one varifocal camera first and set up a test stand for it that can be easily moved around. Test using that, viewing using the web interface of the camera, during the day and at night. Have someone walk around behaving like a miscreant and see if you can identify them. There is also information for choosing hardware and securing the system along with a whole bunch of other good stuff.

Don't chase megapixels unless you have a really BIG budget. Chase sensor size and bigger is better. To confuse you more sensor sizes are listed in fractions so do the basic math to be sure, 1/2.7 is bigger than 1/2.8 or 1/3. General rule of thumb is that a 4MP camera will easily outperform an 8MP camera when they both have the same sensor size. Reason being that there are twice as many pixels in the 8MP versus the 4MP. This results in only half the available light getting to each pixel in an 8MP that a pixel in the 4MP "sees".

A dedicated PC doesn't need to be either expensive to purchase or to run. A used business class machine can be had from eBay and various other sources. The advances made in Blue Iris make it easily possible to run a fairly large system on relatively inexpensive hardware which also makes power consumption low, as in under 50 watts in many cases. The biggest expenses turn out to be hard drives for storing video and a PoE switch to power the cameras and, of course, the cameras themselves.

The three basic rules of video surveillance cameras-

Rule #1 - Cameras multiply like rabbits.
Rule #2 - Cameras are more addictive than drugs.
Rule #3 - You never have enough cameras.

Quick guide -

The smaller the lux number the better the low light performance. 0.002 is better than 0.02
The smaller the "F" of the lens the better the low light performance. F1.4 is better than F1.8
The larger the sensor the better the low light performance. 1/1.8" is better (bigger) than 1/2.7"
The higher the megapixels for the same size sensor the worse the low light performance. A 4MP camera with a 1/1.8" sensor will perform better than a 8MP camera with that same 1/1.8" sensor.

720P - 1/3" = .333"
2MP - 1/2.8" = .357" (think a .38 caliber bullet)
4MP - 1/1.8" = .555" (bigger than a .50 caliber bullet or ball)
8MP - 1/1.2" = .833" (bigger than a 20mm chain gun round)

Don't believe all the marketing hype no matter who makes the camera. Don't believe those nice night time captures they all use. Look for videos, with motion, to determine low light performance. Any camera can be made to "see" color at night if the exposure time is long enough, as in half a second or longer. Rule of thumb, the shutter speed needs to be at 1/60 or higher to get night video without blurring.

Read the reviews here, most include both still shots and video.

Avoid Reolink, Foscam, SV3C, Nest, and all the other consumer grade cameras. They all struggle mightily at night and never get anything useful on video. Here's a link to a whole thread debunking Reolink in particular.

Compiled by mat200 -

Avoid WiFi cameras, even doorbell cameras. WiFi is not designed for the constant, 24/7, load of video that a surveillance camera produces. At best, with two cameras on WiFi, they will still experience dropouts multiple times daily. Murphy's Law says that will happen at the worst possible moment.

Lens size, focal length, is another critical factor. Many people like the wide, sweeping, views of a 2.8mm lens but be aware that identification is problematic with a lens that wide. Keep in mind that it may take two cameras, or more, to provide the coverage you need or desire. Another factor that effects view angles is the sensor size. Typically larger sensors will have a larger field of view in any given lens size.

The 5442 series of cameras by Dahua is the current "king of the hill". They are 4MP and capable of color with some ambient light at night. The 2231 series is a less expensive alternative in 2MP and does not have audio capabilities, no built in microphone, but is easier on the budget. The 3241T-ZAS has similar spcs as the 2231 and has audio. There are also cameras available from the IPCT Store right here on the forum and from Nelly's Security who has a thread in the vendors section.

Review - 8MP 1/1.2" sensor full color camera


5442 Reviews

Review - Loryata (Dahua OEM) IPC-T5442T-ZE varifocal Turret

Review - OEM IPC-B5442E-ZE 4MP AI Varifocal Bullet Camera With Starlight+

Review-OEM 4mp AI Cam IPC-T5442TM-AS Starlight+ Turret

Review IPC-T5442TM-AS-LED (Turret, Full Color, Starlight+)

Review: IPC-HDBW5442R-ASE-NI - Dahua Technology Pro AI Bullet Network Camera

2231 Review
Review-OEM IPC-T2231RP-ZS 2mp Varifocal Turret Starlight Camera

3241T-ZAS Review

Less expensive models -

VPN Information Thread
 

SouthernYankee

IPCT Contributor
Joined
Feb 15, 2018
Messages
5,170
Reaction score
5,320
Location
Houston Tx
My standard welcome to the forum message.

Read Study Plan before spending money
Cameras are for surveillance to get information for after the fact.

Please read the IP Cam Talk Cliff Notes and other items in the IP Cam Talk Wiki. (read on a real computer, not a phone). The wiki is in the blue bar at the top of the page.

Read How to Secure Your Network (Don't Get Hacked!) in the wiki also.


Quick start
1) If you do not have a wired monitored alarm system, get that first
2) Use Dahua starlight cameras or Hikvision darkfighter cameras if you need good low light cameras.
3) Start with a good variable focus camera, so you test for the correct lens,lighting, camera placement.
4) use a VPN to access home network (openVPN)
5) Do not use WIFI cameras.
6) Do not use cloud storage
7) Do Not use uPNP, P2P, QR, do not open ports,
8) More megapixel is not necessarily better.
9) Avoid chinese hacked cameras (most ebay, amazon, aliexpress cameras(not all, but most))
10) Do not use reolink, ring, nest, Arlo, Vivint cameras (they are junk), no cloud cameras
11) If possible use a turret camera , bullet collect spiders, dome collect dirt and reflect light (IR)
12) Use only solid copper, AWG 23 or 24 ethernet wire. , no CCA (Copper Clad Aluminum)
13) use a test mount to verify the camera mount location. My test rig: rev.2
14) (Looney2ns)If you want to be able to ID faces, don't mount cams higher than 7ft. You want to know who did it, not just what happened.
15) Use a router that has openVPN built in (Most ASUS, Some NetGear....)
16) camera placement use the calculator... IPVM Camera Calculator
17) POE list PoE Switch Suggestion List
18) Camera Sensor size, bigger is general better Sensor Size Chart
19) Camera lens size the bigger number the more range the less FOV. . Which Security Camera Lens Size Should I Buy?
20) verify your camera placement, have a friend wearing a hoodie, ball cap and sunglasses looking down approach the house, can you identify them at night ?
21) DO NOT UPGRADE your NVR or camera unless you absolutely have a problem that needs to be fixed and known what you are doing, if you do you will turn it into a brick !!
 
Top