hdw4431m reset

AlbertoIt

AlbertoIt

Getting the hang of it
Jul 19, 2018
186
15
italy
Hello, i have sold some of my cameras (Dahua hdw4431m) so I need to reset them before giving them to purchaser. They were connected to a Dahua nvr. I wanted to do a factory reset connecting one by one to a pc (and of course giving them power). I opened config tool and then web login but at the given adress (10.1.1.66 which seems the address given by NVR) nothing appears. Is there any other way?

Inviato dal mio Redmi Note 5 utilizzando Tapatalk
 
Yes, It worked and I was able to reset to factory. Just another question, since I'm going to replace 4 of 7 cameras do I have to reset also remaining 3 cameras when I will put it the new cameras?

Inviato dal mio Redmi Note 5 utilizzando Tapatalk
 
  • Like
Reactions: alastairstevenson
No, there is no reason to reset to default the cameras, the only thing to which you have to take care, is the order (read 'channel') in which the new cameras will be added to the NVR.
 
redfive said:
No, there is no reason to reset to default the cameras, the only thing to which you have to take care, is the order (read 'channel') in which the new cameras will be added to the NVR.
Click to expand...
What you mean by "take care to the channel"?


Inviato dal mio Redmi Note 5 utilizzando Tapatalk
 
redfive said:
D1,D2, D3 and so on ...
Click to expand...
Ok, I have a 8 ports Poe NVR. Usually i connect all 7 cameras in the order I want (D1 port1, D2 port 2 etc) then I switch on the NVR and it's done. That's what you wanted to say?

Inviato dal mio Redmi Note 5 utilizzando Tapatalk
 
More or lesses, yes, @AlbertoIt, we have already talk about this ... :) Even If, IIRC, I believe that the switchports to which the cameras are hooked up, don't matter so much, rather, is the order on which you connect the cameras the first time who determines the channels.
Have a nice evening !
 
You must log in or register to reply here.
Top Bottom