This was my first simple attempt to mount an ip camera in a bird box while "covering" the outside with a PTZ.
My next project is a to put a 4mp cam with audio in a larger box.
Main problem for me was to find a wide angle lens camera that had good depth of field without too much distortion along with a small footprint. The video above was shot with a no brand 1 mp Chinese camera with IR and a 2.8 lens. Installation was easy. Camera's housing diameter is 2/14 inches. So I cut out a 2/14 inch hole with a hole saw enlarged it slightly with a file, pushed the camera in as far as it would go then ran a bead of silicon glue around the opening.
Tubac
My next project is a to put a 4mp cam with audio in a larger box.
Main problem for me was to find a wide angle lens camera that had good depth of field without too much distortion along with a small footprint. The video above was shot with a no brand 1 mp Chinese camera with IR and a 2.8 lens. Installation was easy. Camera's housing diameter is 2/14 inches. So I cut out a 2/14 inch hole with a hole saw enlarged it slightly with a file, pushed the camera in as far as it would go then ran a bead of silicon glue around the opening.
Tubac
Last edited by a moderator: