Firmware v 5.6.xxx for HikVision DS-2CD1143G0-I

chribonn

chribonn

n3wb
Oct 18, 2014
25
4
Would anyone have the v 5.6 firmware for the above HikVision IP Cameras please?

HikVision's site only seems to carry the v 5.7 yet when I tried to upgrade I get the "Failed to get the upgrading progress. " error.

I am on v 5.5 and if I can get hold of v5.6 at least I would upgrade one notch.

Thanks.
 
Last edited:
Download Capture.PNG

Sadly both firmwares failed.

I don't fully comprehend how a firmware for a camera would fail.
 
Silly question. I presume your extracting the zip file then just utilising the correct "bin" file for the update?
 
paul@austins.tv said:
Silly question. I presume your extracting the zip file then just utilising the correct "bin" file for the update?
Click to expand...

I extracted the zip file: yes.

Correct bin file: I don't understand.

I am using iVMS 3.9.1.4 because I could not find version 3.10 -- the hikvision site link points to a file does not exist. Besides this camera (DS-2CD1143G0-I) I also have another hikvision (DS-2CD2347G2-LU) which I upgraded using this software by extracting the zip into a folder with the same name and using the update firmware option.
 
paul@austins.tv said:
Silly question. I presume your extracting the zip file then just utilising the correct "bin" file for the update?
Click to expand...

I extracted the zip file: yes.

Correct bin file: I don't understand.

I am using iVMS 3.9.1.4 because I could not find version 3.10 -- the hikvision site link points to a file does not exist. Besides this camera (DS-2CD1143G0-I) I also have another hikvision (DS-2CD2347G2-LU) which I upgraded using this software by extracting the zip into a folder with the same name and using the update firmware option.
 
I don’t understand why you say 5.7 doesn’t exist in the link I gave you? Disconnect your camera and your computer from the network and connect computer directly to your camera through Ethernet cable and I can’t see why it would be any trouble.
 

Attachments

 
Last edited:
  • Like
Reactions: chribonn
Cami said:
I don’t understand why you say 5.7 doesn’t exist in the link I gave you? Disconnect your camera and your computer from the network and connect computer directly to your camera through Ethernet cable and I can’t see why it would be any trouble.
Click to expand...
You're right I got the version wrong.

Camera is on 5.5. 5.6 does not exist and 5.7 does not work.
 
Cami said:
Yep good shout….Hik are very good at confusing model numbers. Try this….


or this


or this


Finding the correct firmware can be messy. Hopefully you get it sorted. Good luck
Click to expand...

These are 5.5 versions.

The link at DS-2CD1143G0-I displays a 5.7 version that does not work. Baffles me that a company like Hikvision are so confused on this front. It really does not take that much effort.

Maybe there eventually sort themselves out and are able to provide a level of support that is better.
 
chribonn said:
The link at DS-2CD1143G0-I displays a 5.7 version that does not work.
Click to expand...
That's for the (C) hardware variant.
Over the past several years there have been significant semiconductor supply chain problems, resulting in hardware variants of many models, which have required corresponding variants of the associated firmware.
It's a hard-to-spot subtlety that can be quite confusing.
 
You must log in or register to reply here.
Top Bottom