looney2ns
IPCT Contributor
Dahua Technology - World-leading Video-centric AIoT Solution and Service Provide
Dahua Technology
Firmware for newer dahua cams as well as detailed specs available here
- Thread starter fenderman
- Start date
Founded on official Dahua site a new firmware version for SD1A404XB-GNR and so on : DH_SD-Prometheus_MultiLang_PN_Stream3_V2.812.0000008.1.R.210802
Models : SD5A232XB-HNR-AC SD5A232XB-HNR SD5A432XB-HNR-AC SD5A432XB-HNR ECA3A1404-HNR-XB-FE CA3A1404-HNR-XB SD5A225XA-HNR SD1A404XB-GNR-W SD1A404XB-GNR
Models : SD5A232XB-HNR-AC SD5A232XB-HNR SD5A432XB-HNR-AC SD5A432XB-HNR ECA3A1404-HNR-XB-FE CA3A1404-HNR-XB SD5A225XA-HNR SD1A404XB-GNR-W SD1A404XB-GNR
anyone find a new firmware for SD8A820WA-HNF mine is dated 11-22-2019
ljw2k
Known around here
You looked here .>> Firmwares (dahuasecurity.com)
nothing for firmware
ljw2k
Known around here
What's the reason that you need the firmware as the saying is if not broke then don't fix.
I can't get the auto tracking to work
ljw2k
Known around here
Might be a good idea to contact your dahua dealer or the company who you purchased it from and I would try a Master Factory Reset first.
I think a newer firmware is DH_SD-Fafnir_MultiLang_PN_Stream3-NormalV2_V2.810.0000014.0.R.200803.bin
Index of /Firmware/Kamery -IP- obrotowe- PTZ/AI/ (dahua.support)
They also have the 112209 firmware on the site
I think a newer firmware is DH_SD-Fafnir_MultiLang_PN_Stream3-NormalV2_V2.810.0000014.0.R.200803.bin
Index of /Firmware/Kamery -IP- obrotowe- PTZ/AI/ (dahua.support)
They also have the 112209 firmware on the site
Last edited:
Eagle29
Getting the hang of it
Is this the latest firmware for 5842 series - System VersionV2.840.15OG007.0.R, Build Date: 2021-12-21
on Dahua website I am seeing - Dahua Technology - Leading Video Surveillance Solution Provider with CCTV Products, IP Camera, PTZ, HDCVI products, NVR, Intelligent Building, Intelligent Transportation and Software - Dahua Technology
DH_IPC-HX5XXX-Volt_MultiLang_PN_Stream3_V2.840.0000000.13.R.220110
@EMPIRETECANDY - Can you please look into this?
on Dahua website I am seeing - Dahua Technology - Leading Video Surveillance Solution Provider with CCTV Products, IP Camera, PTZ, HDCVI products, NVR, Intelligent Building, Intelligent Transportation and Software - Dahua Technology
DH_IPC-HX5XXX-Volt_MultiLang_PN_Stream3_V2.840.0000000.13.R.220110
@EMPIRETECANDY - Can you please look into this?
EMPIRETECANDY
IPCT Vendor
We will have another firmware at the end of June, most cams will have an update then. When ready to test i will post here.
Bump - any update the on the new firmware?
EMPIRETECANDY
IPCT Vendor
This week Get a beta one, but has some bugs, so need time to fix up.
There's new firmware out.
Eagle29
Getting the hang of it
Can you provide the link for new firmware for 5842, if u have it handy?
I just saw it on the link that you yourself posted. There's a new one there from Aug 2nd.
Not sure if Andy has a different one.
The North Face
Getting the hang of it
I just installed the FW from link above on my EmpireTech HDW5241H-AS-PV, it at least starts up and seemingly works like normal. Not the new interface which is probably good, since I'd expect it to take at least 12 months to be stable given how many updates and back-and-forth "AI" detection of Humans took before it worked well enough. Also a bit wary of what toll the new interface will take on the older camera CPUs since they seemed to be stretched to the limit even with the shipped FW. But maybe the new web UI won't be available for the Volt platform.
Anyway, the new FW seemed to add a few more IVS "AI" things that I can't recall I had in my January 2022 revision 13 firmware (this is rev 18 if I interpret Dahua's naming correctly). See screenshot. I haven't tried them out, I only use Tripwires for Humans.
Edit: there's also a "Smart Object Detection" tab under Event that I don't think was present in my previous FW either. That has a corresponding tile under Smart Plan too so can't be had at the same time as IVS, at least not on my camera.
Anyway, the new FW seemed to add a few more IVS "AI" things that I can't recall I had in my January 2022 revision 13 firmware (this is rev 18 if I interpret Dahua's naming correctly). See screenshot. I haven't tried them out, I only use Tripwires for Humans.
Edit: there's also a "Smart Object Detection" tab under Event that I don't think was present in my previous FW either. That has a corresponding tile under Smart Plan too so can't be had at the same time as IVS, at least not on my camera.
Attachments
FYI - I installed the Dahua V2.84 18R220629 FW from Dahua Technology - Leading Video Surveillance Solution Provider with CCTV Products, IP Camera, PTZ, HDCVI products, NVR, Intelligent Building, Intelligent Transportation and Software - Dahua Technology and it's causing my 5842 cameras to be drawing about 20% more power, which is causing low volt alarms on some of my cameras where they are restarting themselves. I'm reverting back to Empire's prev FW...
