DS-2CE5582P-vfir

[ilhamagh]

Hello, I've got myself two retired Hikvision Cam :
DS-2CD2122FWD-IS & DS-2CE5582P-vfir.

The first one work with no issue, but I can't find any info on the 2nd model.
Poe switch doesn't power the cam, I assume this one didn't support the standard.
Tried poe injector with no success. Maybe it's just dead I just want to double check.

The cable connect to the board with 4-pin molex, I check the continuity and all 4 works fine.
Can the IR module works independently without the main board working?
I tried to manualy power the cam with 12v through pin 4 & 5 / 5 & 8 of the UTP connection and the IR power up and detecting brightness.

Thanks.

 

[alastairstevenson]

I can't find any info on the 2nd model.

This seems to be an analogue camera. Presumably there is a BNC cable and a power cable.
There are plenty of references on a Google search.
Including the attached user manual :

 

[ilhamagh]

This seems to be an analogue camera. Presumably there is a BNC cable and a power cable.
There are plenty of references on a Google search.
Including the attached user manual :

It's actually only have one rj45 cable

 

[alastairstevenson]

It's actually only have one rj45 cable

Hmm.. I wonder if it's been swapped out?

 

[ilhamagh]

Hmm.. I wonder if it's been swapped out?

Nah, I found a seller sell the exact same model.
They have the exact config with 1 cable, just no official info out there, maybe this one is a custom model for my country.