DS-2CD3132-I No Sub Stream Option on DS-7104N-SN/P NVR?

Well... I couldn't sleep.
I TFTP'd the NVR. Fixed nothing.

Then I sat and thought it out & realised I never factory reset the camera! I only checked if I could view the two different streams!
So I just now factory reset the camera & it is fixed.
So now I have Main & Sub Streams & 30fps!

Thanks epcjay & Michelin Man!
 
Hikvision strikes again. Glad to hear you got it sorted.

Sometimes even a reset can be tricky, it could have gone back to it's roots and started speaking Chinese.
 
Not showing the sub stream is a common issue with the Hikvision cameras. In general here are the steps to fix it:

1. Upgrade to the latest available firmware both the NVR and the camera.
2. Delete the camera from the NVR
3. Reset camera to default settings.
4. Add the camera again.

In case you use original Hikvision products the above steps works for sure. In your case you have to try.
About the fps 25/30 there is no setting for that (it depends on the firmware, but most probably on the hardware also). If the camera is intended for the china/european market it should be PAL - 25 fps. For the US and other markets should be NTSC - 30 fps.
While for the 50/60Hz should be available option in the camera image settings.

Hah... I didn't notice you got the solution :)
 
I would put upgrading the firmware the LAST, thing to do. All the other options are not as risky as upgrading the firmware.

There is more to lose if you upgrade the firmware for the hell of it before exploring other options. Even if you have other issues, you can address them together with the firmware update as the last resort.
 
Michelin Man said:
I would put upgrading the firmware the LAST, thing to do. All the other options are not as risky as upgrading the firmware.

There is more to lose if you upgrade the firmware for the hell of it before exploring other options. Even if you have other issues, you can address them together with the firmware update as the last resort.
Click to expand...
Yup especially that the 3132 is a Chinese cam

Sent from my LG-D852 using Tapatalk
 
You must log in or register to reply here.
Top Bottom