DS-2CD2347G2-L(U)

A

Arnold Lift

Young grasshopper
May 20, 2020
32
0
Austria
Hello Guys, Just unboxed the 2nd Gen. Colorvu and it seems to be Impossible to enable the Audio. Any suggestions Welcome.

I can select any encoding possible in the Web GUI. But when i try to raise the Volume on the mute icon i immediatly get the Error Message saying "Audio on failed"

Is there anything "Special" you have to do on this Model?

Firmware Version: 5.5 134 build 200430
 
Make sure you have the Audio & Video ticked.
That firmware is also an old firmware I would suggest you update to Firmware Version 5.5.150 build

2021-03-11 15_41_45-Configuration.jpg
 
  • Like
Reactions: alastairstevenson
Yes, that did it! Just found a Video about it on YouTube! This seems to issue a lot of people. Could you also recommend a better App than the ivs4500 for Android? Thx alot!
 
Will Blue Iris Work when you don't have a NVR in use and have each camera with SD- Cards arround your House? App doesn't seem to be free so each device of the Family has to pay for it...

Currently what we're looking for is a App that rather Shows you detailed Clips with Time and Date idealy with a small Preview you can Tap through... Anything instead of scrolling a Line through recordings!

Is there anything Out there some of you might use?
 
It is not a FREE app but well worth it. If I was you I would invest in a PC to record to with Blue Iris which is around $60 then the BI Android App around $10 other than that an NVR
 
Alright i use the HiLook App with some additional Features Like Auto Pinch/Zoom without looking for a Button to enable this feature. Now trying to Update to the latest Firmware since the "Turn on LED only for Motion and specific" is Not available.

So could you Post the Link to the latest Firmware for this Model?
 
Arnold Lift said:
So could you Post the Link to the latest Firmware for this Model?
Click to expand...
It's an inconsistent moving picture - Hikvision have been withdrawing the various 5.5.160 versions of the G3 firmware, it's a bit bugged and seems to be a work in progress.
However - at your own risk - check out the still-remaining firmware download link at the bottom of the product info here :

DS-2CD2347G2-L(U)

Hikvision DS-2CD2347G2-L(U) 4 MP ColorVu Fixed Turret Network Camera
www.hikvision.com www.hikvision.com
 
  • Like
Reactions: ljw2k
Thanks. I used the Version from the Forum that i found here by Security Perth.


The Fundamental Question now is: Would you need TIME to select for White Light LED Trigger?


Skip to 22:24 to See what i mean.

The Security Perth FW Just adds a White Light Alarm Function where NO Time duration that can be determined.
 
Arnold Lift said:
The Security Perth FW Just adds a White Light Alarm Function where NO Time duration that can be determined
Click to expand...

There is a arming schedule for white light with firmware from Perth Security under
Basic Event / White light settings. However I don’t recommend this firmware.
Time duration on is set via the linking method


This link details it setup.
 
Does anyone of you know If the similar Dahua Model IPC-HDW5442TM-AS-LED has a Firmware Update nowadays, that can do a motion activate LED light for a certain Time as well?
 
You must log in or register to reply here.
Top Bottom