Dahua -PTZ19245U-IRB-N(-B) 45x Starlight PTZ Positioning cam

The only issue is that camera requires Hi-POE which isn't a ratified IEEE standard so you'd have to use an injector as I doubt there are any POE switches that provide that currently and the network cable would likely need to be Cat 6a or above since Cat 5e heats up enough with POE + which is only 25w HI-POE is 60w Impulse CCTV | Industrial grade CCTV IP Video Surveillance SystemsOther wise it does look like a nice feature set if it is not outside of the budget.
 
Looks expensive too.
 
this one price very expensive , around 1600usd, it has IP68, can drop inside the water.....
 
  • Like
Reactions: looney2ns and LeeH
I was looking at it the other day, after the much more reasonably priced 25x model showed up on here and piqued my interest. Hopefully they come out with a more budget friendly version in the next couple of years, like they now have with the 45x SD6CE245U-HNI - which Andy has listed on his store by the way.
 
Last edited:
  • Like
Reactions: looney2ns and EMPIRETECANDY
I’m going to migrate over to Dahua when my hiks die one by one. They seem to have a much better rep although I’ve had very little bother with the hiks
 
Terk said:
The only issue is that camera requires Hi-POE which isn't a ratified IEEE standard so you'd have to use an injector as I doubt there are any POE switches that provide that currently and the network cable would likely need to be Cat 6a or above since Cat 5e heats up enough with POE + which is only 25w HI-POE is 60w Impulse CCTV | Industrial grade CCTV IP Video Surveillance SystemsOther wise it does look like a nice feature set if it is not outside of the budget.
Click to expand...

Eh, that's why they make transformers and 16 gauge wire. ;)
 
You must log in or register to reply here.
Top Bottom