Glad the explanation helped!
Get out of that area LOL. All that will do is frustrate the you know what out of you.
Do these steps:
- Create a preset
- Turn off Motion Detection and Smart Motion Detection
- Create Smart Plan and add Deep IVS plan for the preset
- Go to Deep IVS and create a rule. I would suggest an intrusion box outlining the area you want coverage. Select appears and crosses for the box
- Go to the boxes that says human and vehicles and check those.
- Do not put a min size in the settings to the left.
- Set the tracking time for the length of time you want it to track.
BOOM. BAM. DONE. Now the AI of the PTZ will only track humans and vehicles and not shadows and leaves...
This is a GREAT simple tutorial. I have a question....#7 above, I assume that is in the rule config of Deep IVS? I can't see it in my Rule config. It's driving me crazy that my cam (bought the
SD49225XA-HNR from
@EMPIRETECANDY on Amazon) suddenly stopped autotracking. It worked great at first. The problem I'm having is I've been tinkering (as my name implies..heehee) with the camera settings and my BI settings and just recently noticed that the autotracking stopped working as did my PTZ controls from BI. I'm almost to the point of removing it from BI, factory resetting and re-setup the camera and it's use in BI, but I thought I'd ask you for input first.
I used your instructions above and realized I had both Motion detection and Smart Motion Detection enabled. I turned those off. But it's still not tracking. I did (about 3 weeks ago) upgrade the firmware from Dahua...did that break something? Here's my version info....
Device Type SD49225XA-HNR
System Version V2.810.0000025.3.R.P9.2520.UN.NR, Build Date: 2021-07-05
WEB Version V3.2.1.1082385
ONVIF Version 20.06(V2.9.0.979397)
PTZ Version V2.401.0000000.64.RHNZ_200219_34642
S/N 7D0D40EPAJ38D6F
Security Baseline Version V2.1
Thanks for the help in advance...