Can't tell if HW Acceleration is working.

J

JonSnow

Getting the hang of it
Dec 10, 2019
111
45
Winterfell
I have 2 reolink cameras a 410 and 420, running the latest BI5 on a i3-i8100 and server 2016 essentials, using intel driver 25.20.100.6326 which was installed by windows. I know quicksync works on this driver as i use it to convert mpeg2 to h264 using MCEBUDDY.

CPU hovers at about 20%, i have made sure hardware Acceleration is set to intel and have also set the camera option to intel, read the wiki and optimization thread.

I also installed a demo version of BI5 on a i7-3520M with Intel driver 10.18.10.5069. The CPU also hovers at about 20%, checking task manager the GPU usage is always zero.

What do i need to do to get HW Acceleration working on the I3 8100?
 
  • Like
Reactions: aristobrat
The demo version has features disabled. The Hardware acceleration is disabled in the demo version.

Reolink cameras may not support hardware acceleration as they do let allow you set the iframe.
 
@JonSnow the other option is to go to settings in the Smart Client and select the advanced option and choose the overlay diagnostics option and set it to level 2 and this will let you know if the Intel hardware acceleration is active. Also the GPU feature should also be available within task manager to see if the application is utilizing the GPU. Right click within the status pane at the top and you can also enable that.
 
TazzieDevil7373 said:
@JonSnow the other option is to go to settings in the Smart Client and select the advanced option and choose the overlay diagnostics option and set it to level 2 and this will let you know if the Intel hardware acceleration is active. Also the GPU feature should also be available within task manager to see if the application is utilizing the GPU. Right click within the status pane at the top and you can also enable that.
Click to expand...


By smart client do you mean the BI settings? On server 2016 the GPU option is not available in task manager since it's the same code base as Windows 10 1607.

Using GPUZ, the readings definitely say quicksync is working, with the gui not open im at 1% but then it jumps to 14% as soon as i launch BI.
 
SouthernYankee said:
The demo version has features disabled. The Hardware acceleration is disabled in the demo version.

Reolink cameras may not support hardware acceleration as they do let allow you set the iframe.
Click to expand...

As i understand direct record to disk is disabled but not HW Acceleration.
 
@JonSnow no not at all you need to go into the Smart Client settings and this is common across all the versions including the free version as the client is the same. If you enable that feature you will see an overlay per camera that will show you relevant diagnostics for hardware acceleration. Hardware acceleration for Intel is available on the free version but not Nvidia as per the comparison chart.
 
TazzieDevil7373 said:
@JonSnow no not at all you need to go into the Smart Client settings and this is common across all the versions including the free version as the client is the same. If you enable that feature you will see an overlay per camera that will show you relevant diagnostics for hardware acceleration. Hardware acceleration for Intel is available on the free version but not Nvidia as per the comparison chart.
Click to expand...
Still not sure what you mean by smart client
 
You must log in or register to reply here.
Top Bottom