Can you set an auto reboot through Blue Iris

C

critterles

Young grasshopper
Jan 31, 2015
47
1
I have 6 Foscam18910W cams at 2 locations. Recently a couple cams have gone dark. If I sign in and check IPCam only the active cams show. If I power down the cam it seems to be fine for a few days or so. Is there any way to set the cam to do an auto reboot at a specific time or if communication is lost? These cams are not close so powering down is not easy.
This issue just started in the last month or so.
Any suggestions are appreciated.
 
this is typically a feature thats located within the camera its self.. you could put it on a timer if it dont have such an option through its own UI.. or i dunno buy some real security cameras that'll do there job reliably.
 
critterles said:
I have 6 Foscam18910W cams at 2 locations. Recently a couple cams have gone dark. If I sign in and check IPCam only the active cams show. If I power down the cam it seems to be fine for a few days or so. Is there any way to set the cam to do an auto reboot at a specific time or if communication is lost? These cams are not close so powering down is not easy.
This issue just started in the last month or so.
Any suggestions are appreciated.
Click to expand...
If you cannot log into the camera itself when its down, then blue iris cant send a reboot command. Are these cameras on wifi?
 
You have replied to 2 of my post with a very sarcastic know it all answers.
Please, Don't waste your time answering any more of my posts.
 
  • Like
Reactions: Warsaws
fuck you... put me on ignore and I'll return the favor.
 
You must log in or register to reply here.
Top Bottom