camera stopped responding to web after 5.2.3

M

mangebest

n3wb
May 31, 2015
14
4
sweden
Hello
im new here but here is my problem.
I have 5 hikvision on swedish language bought in china[h=1]DS 2CD2132-I[/h]in my home. like an idiot i upgraded them all when the updated firmware came.
all stoped responding to webinterface.
They give good picture in the NVR-system, i have netgear readynas surveillance.
and they respont to ping. but i cant log onto them via web and lokal network.
i have tryed to TFTP´d them back to 5.2.0 but no respons.
any ideas

best regards
Magnus
 
They give good picture in the NVR-system, i have netgear readynas surveillance.
Click to expand...
So the video looks normal on the NVR but you don't see the web admin page when you access in the browser?

A couple of things to try:
Use / install Hikvision's SADP tool to confirm the cameras are visible on your network and that they have the IP addresses that you expect.
http://www.hikvision.com/en/us/download_more.asp?id=1120

Use / install the very good Windows open-source tool 'ONVIF Device Manager' from sourceforge.net
This should find your cameras and provide lots of information about them.
Check out the web / HTTP port on the 'Network Settings' page. Maybe it's reverted to the default 80 if you'd set it to something different a while back.
And check out the 'Web page' so see if that looks normal.
 
ONVIF Device Manager will discover ONVIF devices on your network and give lots of useful info about them, for example if you had changed the HTTP port and forgot, it will show you the settings.
It's nothing to do with the Hikvision TFTP auto updater tool.

You probably need to go down this path:
What was the version of firmware you used - was it a ML (Multi-language) release?
Check out this thread on changing to English: http://www.ipcamtalk.com/showthread....WEEK)-mtd-Hack
The method should work OK for your current 5.2.3 version.
And here is at least an English firmware that should get you back to English as a starting point: http://www.hikvisioneurope.com/porta...uild%20141024/
Click to expand...
 
Thank you for your effort.
im sorry to say i dont have the knowlege to perform the changes that are
nessesary.
Can you point me to where i can "study" ?
youtube?

best regards

Magnus
 
You must log in or register to reply here.
Top Bottom