Camera IO to trigger record on all cameras

E

enabl3D

n3wb
Jul 31, 2017
5
0
Here's what i'm trying to accomplish: record on all cameras if motion detected and my alarm system is armed.
My NVR has no IO interface so I plan to buy a Hik camera with IO option and interface it to my alarm's output contact. I think i can handle this portion... the question is will this alarm trigger on "Cam 1" be visible to all the other cameras so they also start recording if motion is detected?

Thanks
 
With the right NVR and right support for the camera you can use the camera input as a general input on the NVR for triggering events like motion detection or activating/deactivating schedule for recording...
 
enabl3D said:
the question is will this alarm trigger on "Cam 1" be visible to all the other cameras so they also start recording if motion is detected?
Click to expand...
Assuming it's a Hikvision NVR - in the 'Trigger channel' settings for en event, it's possible to trigger any or all of the other configured channels.
 
If you look at the data sheet of the NVR you will find out that you have 4 inputs and 1 output. So you can connect your alarm system directly to the NVR if 4 inputs are enough for you...
 
enabl3D said:
I guess Laview dumb down their version by removing the IOs.
Click to expand...
The Hikvision model number would have a /A suffix if it had the optional alarm I/O, for example DS-7608NI-E2/8P/A
You will know if your NVR has alarm I/O by looking at the back panel for the green connectors for the alarm wiring.
 
You must log in or register to reply here.
Top Bottom