Blue Iris and Ipcc 9610/960E camera

A

agspecialties

n3wb
Nov 30, 2015
29
0
I am having problems with getting this IPCCC camera hooked up to Blue Iris.

I am getting a "HTPP: 12007 name not resolved"

Any ideas???

I can log into the camera by the IP address.....I can't get the camera into Blue Iris.
 
agspecialties said:
I am having problems with getting this IPCCC camera hooked up to Blue Iris.

I am getting a "HTPP: 12007 name not resolved"

Any ideas???

I can log into the camera by the IP address.....I can't get the camera into Blue Iris.
Click to expand...
Have you double checked all your credentials including ports/passwords/usernames/ip address etc.
 
I have double checked everything. We have tried it on another BI program and it works. Put the same info on my BI and nothing. I get the 12007 error.
 
agspecialties said:
I have double checked everything. We have tried it on another BI program and it works. Put the same info on my BI and nothing. I get the 12007 error.
Click to expand...
are both pc's on the same network?
Try deleting the camera and readding it again.
 
agspecialties said:
No, its not on the same network. This camera is in a different location.
Click to expand...
Well that explains why its not working...you need to properly port forward it and then use the external ip address or dynamic dns address. You can also pull the camera stream directly from the other blue iris machine - you need to have the webserver properly configured and port forwarded as well.
 
Yah.....we have done all of that. I have two other cameras that are set up and working just fine. I can't get this third one which is the IPCC camera to communicate with my BI.
 
agspecialties said:
Yah.....we have done all of that. I have two other cameras that are set up and working just fine. I can't get this third one which is the IPCC camera to communicate with my BI.
Click to expand...
You likely dont have the camera properly port forwarded....do you know what ports need to be port forwarded for the camera to work? have you made sure you didnt duplicate any?
 
I got the camera to show on Blue Iris, but I am having some issues with it. I am getting a halo affect around the camera at night and also, the controls on the camera don't seem to work through Blue Iris.

Any ideas??

Screen Shot 2015-12-09 at 8.14.17 PM.png
 
You must log in or register to reply here.
Top Bottom