Hi guys... I bought a new Amcrest ASH43 camera and I have been trying to set it up with the instructions on this page How To Setup an Amcrest Smart Home Bullet Camera In Blue Iris (ASH43) – Amcrest following every step... I have other Amcrest cameras in my setup (different models though) but I keep getting a NO SIGNAL and "Amcrest unable to login: 107" error. If I check the "Skip initial HTTP and DNS reachability tests" in the settings I keep getting a NO SIGNAL message with a "Error: 80000274c (Failed to connect) 0" message on the bottom right.
This Amcrest camera is up and running great in the Amcrest APP, along with the other Amcrest cameras... I have no idea what else to do and I bought 4 of this model...
Can you guys please gimme a hand on this.. Thanks!
Carlos De Sedas
Blue Iris 5 Release 5.5.2.4 x64 (11/9/2021)
This Amcrest camera is up and running great in the Amcrest APP, along with the other Amcrest cameras... I have no idea what else to do and I bought 4 of this model...
Can you guys please gimme a hand on this.. Thanks!
Carlos De Sedas
Blue Iris 5 Release 5.5.2.4 x64 (11/9/2021)