Amcrest ASH43-W and Blue Iris 5

carlitos03

n3wb
Nov 10, 2021
8
0
panama
Hi guys... I bought a new Amcrest ASH43 camera and I have been trying to set it up with the instructions on this page How To Setup an Amcrest Smart Home Bullet Camera In Blue Iris (ASH43) – Amcrest following every step... I have other Amcrest cameras in my setup (different models though) but I keep getting a NO SIGNAL and "Amcrest unable to login: 107" error. If I check the "Skip initial HTTP and DNS reachability tests" in the settings I keep getting a NO SIGNAL message with a "Error: 80000274c (Failed to connect) 0" message on the bottom right.

This Amcrest camera is up and running great in the Amcrest APP, along with the other Amcrest cameras... I have no idea what else to do and I bought 4 of this model...

Can you guys please gimme a hand on this.. Thanks!

Carlos De Sedas

Blue Iris 5 Release 5.5.2.4 x64 (11/9/2021)
 
No need to create multiple threads...they all show up on the forums home screen regardless of what tag you put on it.

 
  • Like
Reactions: TonyR
No need to create multiple threads...they all show up on the forums home screen regardless of what tag you put on it.



sorry about that! the thing is that I didn't know that there was a dedicated AMCREST forum... my fault... please delete if needed....

Carlos