Welcome!
The IPC-HFW3849T1-AS-PV would be a poor choice as it is not on the ideal MP/sensor ratio - and then they are full color on top of it. Forget about it unless you have stadium quality light at night. More on this in a minute.
There are many threads here discussing how poor of a camera choice that is. Here are two to get you started:
I put this guy up and for some reason, and I can put my finger on it, this picture just looks strange. The grass kind of looks like digital or something. The camera is on the default settings but I feel like I have tweaked most of them. Any suggestions? IPC-HDW3849H-AS-PV is the camera.
ipcamtalk.com
Hello everybody! I replaced my favourite camera HDW5442TMP-ASE with new HFW3849T1P and I came accorss that HDW5442TMP-ASE has much better picture than newer one. I replaced it because HFW3849T1P 8MP instead of HDW5442TMP-ASE 5Mp and HFW3849T1P is TIOC (three in one camera). I didn't expect so...
ipcamtalk.com
Let's start at the beginning so you do not purchase twelve of the wrong cameras!
You need to identify the areas you want to cover and pick a camera designed to cover that distance. In some instances, it may be a 2MP or 4MP that is the right camera. Based on what you are showing, unless you mount lower, fixed cams will only be good overview points but not IDENTIFY capable.
It is why we recommend to purchase one good varifocal and test it at all the proposed locations day and night to figure out the correct focal lengths and cams.
A few other tips....It is simple LOL do not chase MP - do not buy a 4MP camera that is anything smaller than a 1/1.8" sensor. Do not buy a 2MP camera that is anything smaller than a 1/2.8" sensor. Do not buy a 4K (8MP) camera on anything smaller than a 1/1.2" sensor.
Unfortunately, most 4k (8MP) cams are on the same sensor as a 2MP and thus the 2MP will kick its butt all night long as the 4k will need 4 times the light than the 2MP... 4k will do very poor at night unless you have stadium quality lighting (well a lot of lighting LOL). Starlight, ColorVu, Full Color, etc. are simply marketing terms, so don't be sold on those names.
While we are at it, let's make sure you get the right camera...
To identify someone with the wide-angle 2.8mm lens that most people opt for, someone would have to be within 13 feet of the camera, but realistically within 10 feet after you dial it in to your settings.
My neighbor was bragging to me how he only needed his four 2.8mm fixed lens 4k cams to see his entire property and the street and his whole backyard. His car was sitting in the driveway practically touching the garage door and his video quality was useless to ID the perp not even 10 feet away.
Meanwhile my 2MP varifocal optically zoomed 60 feet away to the public sidewalk provided the money shot to the police to get my neighbors all their stuff back. Nobody else had video that could provide anything useful, other than what time this motion blur ghost was at their car.
Here are my general distance recommendations, but switch out the Dahua 5442 series camera to the equivalent 2MP on the 1/2.8" sensor or equivalent Hikvision works as well. These cameras meet all your requirements.
- 5442 fixed lens 2.8mm - anything within 10 feet of camera OR as an overview camera
- 5442 ZE - varifocal - distances up to 40-50 feet (personally I wouldn't go past the 30 foot range but I like things closer)
- 5442 Z4E - anything up to 80-100 feet (personally I wouldn't go past 60 feet but I like things closer)
- 5241-Z12E - anything from 80 feet to almost 200 feet (personally I wouldn't go past 150 feet because I like things closer)
- 5241-Z12E - for a license plate cam that you would angle up the street to get plates up to about 175 feet away, or up to 220 with additional IR.
- 49225 PTZ - great auto-track PTZ and in conjunction with an NVR or Blue Iris and the cameras above that you can use as spotter cams to point the PTZ to the correct location to compliment the fixed cams.
You need to get the correct camera for the area trying to be covered. A wide angle 2.8mm to IDENTIFY someone 40 feet away is the wrong camera regardless of how good the camera is. A 2.8mm camera to IDENTIFY someone within 10 feet is a good choice OR it is an overview camera to see something happened but not be able to identify who.
One camera cannot be the be all, see all. Each one is selected for covering a specific area. Most of us here have different brands and types, from fixed cams, to varifocals, to PTZs, each one selected for it's primary purpose and to utilize the strength of that particular camera.
So you will need to identify the distance the camera would be from the activities you want to
IDENTIFY on and purchase the correct camera for that distance as an
optical zoom.
If you want to see things far away, you need optical zoom, digital zoom only works in the movies and TV...And the optical zoom is done real time - for a varifocal it is a set it and forget it. You cannot go to recorded video and optically zoom in later, at that point it is digital zoom, and the sensors on these cameras are so small which is why digital zoom doesn't work very well after the fact.
Main keys are you can't locate the camera too high
(not on the 2nd story or above 7 feet high unless it is for overview and not Identification purposes unless it is a PTZ or varifocal that can "flatten the angle by optically zooming further out) or chase MP and you need to get the correct camera for the area trying to be covered. A 2.8mm to IDENTIFY someone 40 feet away is the wrong camera regardless of how good the camera is. A 2.8mm camera to IDENTIFY someone within 10 feet is a good choice OR it is an overview camera to see something happened but not be able to identify who.
Also, do not chase marketing phrases like ColorVu and Starlight and Full Color and the like - all cameras need light - simple physics...
A full color camera that needs an LED light and the camera cannot see infrared, so make sure that is the right camera for your needs. It will need the white LED on at night to work or you need a lot of ambient light. I have a Full Color type camera and the LED light on it is a gimmick. It helps for a small diameter circle, but it is no different than going outside at pitch black and turning on your cell phone light - it is bright looking directly at the LED light, but it doesn't spread out and reach very far. Fortunately I have enough ambient light that I do not need the little piddly LED light on and it actually looks worse with it on, but it performs better than my other cameras when tested at the same location. But without some light, a camera with IR capability is the safer bet.
We recommend a purchase of one good varifocal and test it at all the proposed locations day and night to figure out the correct focal lengths and cams.
Regarding an NVR, if you want to ensure compatibility, you should match camera brand to NVR brand. Even with ONVIF compliant cams, there could still be things not working. If you plan to mix/match then you should look at something else like
Blue Iris.
WizSense is just a marketing name for capabilities on the camera. They are all ONVIF triggers and you can bring them in to Blue Iris just fine. The one difference between an NVR and BI though will be that with the NVR you could search by events based on human or vehicle, whereas in BI they are simply alerts, unless you add DeepStack to the mix.
Regarding cheap wifi cameras, we strongly recommend you avoid them.
Wifi routers are problematic for surveillance cameras because they are always streaming and passing data. And the data demands go up with motion and then you lose signal. A lost packet and it has to resend. It can bring the whole network down if trying to send cameras through a wifi router. At the very least it can slow down your system.
Unlike Netflix and other streaming services that buffer a movie, these cameras do not buffer up part of the video, so drop outs are frequent. You would be amazed how much streaming services buffer - don't believe me, start watching something and unplug your router and watch how much longer you can watch NetFlix before it freezes - mine goes 45 seconds. Now do the same with a wifi camera and it is fairly instantaneous (within the latency of the stream itself)...
The same issue applies even with the hard-wired cameras trying to send all this non-buffer video stream through a router. Most consumer grade wifi routers are not designed to pass the constant video stream data of cameras, and since they do not buffer, you get these issues. The consumer routers are just not designed for this kind of traffic even a GB speed router.
You need power to the camera correct? So go with a powerline adapter that allows you to send the video data over your electric wires - it will be more stable and a better option than wifi.