i use continuous recording to the NVR as well as the SD card. SD card is just a back up if for whatever reason my NVR went down. However I went in and set up one camera as you have. Just motion detection with vehicles and humans checked and armed to only trigger a recording if the event occurred. And then to allow some time to pass to capture footage, I decided to do the overdue dreaded windows update and have been patiently waiting for it to finish to check out the results lol. I will update you once I can see what it did!@Vandoe Since you record to SD card as well, do you use Acusense to only record vehicles and humans? And if so, are you using Event > Basic Event > Motion Detection with Vehicle and Human selected?
Alrighty friend. I set one camera as you have. Motion enabled with human and people set to record only on event. I actually got nothing at all.@Vandoe Since you record to SD card as well, do you use Acusense to only record vehicles and humans? And if so, are you using Event > Basic Event > Motion Detection with Vehicle and Human selected?
And this is when you are playing back via web browser on the actual camera?@Vandoe
I tested the exact same configuration as you (tthe only thing I had to change was the recording schedule from event to motion) and the camera still records on any motion, not just vehicles and humans. Recording still gets triggered on leaves blowing around, my hand waving in front of the camera, trees swaying. etc. So, clearly and sadly this is a bug in the 2387's firmware.
Thanks a lot for testing that out. I'll have to plan on sending the camera back if the seller can't get the issue resolved with Hikvision.
Wow yea that is very weird. I’ll check what firmware version I’m on when I get home. Hopefully they can fix it for you. It should work since it’s an acusense camera even without an NVR.Well yes - that's where the issue is, when recording to the SD card in the camera. I don't have an NVR.
All the recordings below except for 2 are just from leaves blowing around and trees swaying. As I said, it does however only notify the app on Human and Vehicle.
View attachment 146262
View attachment 146261
View attachment 146263
Yea makes sense. Was just trying to think of anything else to play around with. Glad to have an NVR to do all this for me regardless lolIf you disable the schedule, it will disable video recording completely. The schedule is necessary as all recording is based on the schedule no matter what. The linkage method ties to the schedule in order to record. If you disable the schedule, there will be no video recording.
The "Upload to FTP/Memory Card/NAS " option is only for a single snapshot image storage. This does not record video. The very last post here also explains that:
Event Storage on SD Card / NAS - I can't see any VCA events?
Hi all, I have a couple of DS-2CD2385G1 cameras, both of which write their video footage to my NAS (I have no NVR). I have configured both cams to record continuously and also record line crossing events (so I thought!). The issue is that when I connect to these cameras using iVMS-4200, I can...www.use-ip.co.uk
Under your record schedule is it set to event or motion? If event, switch it to motion. If it still doesn’t work you must have same issue as OP.I am having the same issue with my 2387G2. Firmware 5.7.10 build 220720. Using BI, not an NVR. Would like the SD card in the camera to only record human and vehicle.
Under Basic Event, motion I have "Target Detection" human and vehicle options checked. The camera records all motion to the SD card, not just human and vehicle.