RJM_50
n3wb
With these larger image sensors, if there is adequate street lights is it okay to leave them in color mode for LPR at night, or does LPR require the B&W infrared LEDs to capture correctly at night?
EmpireTech cameras for each direction of travel:
IPC-T54IR-ZE-S3 1/1.8 4MP image sensor 2.8-12mm lens
IPC-B54IR-Z4E-S3 1/1.8 4MP image sensor 8-32mm lens
Anyone have success with leaving 1/1.8 in color mode at night? If you have to run B&W infrared LEDs, what settings do you run differently than a 1/2.8 camera? What settings do you adjust differently with the larger sensor? (1/1.8 is such a superior camera image sensor, combined with a varifocal optical zoom lens is magnificent even if it can't do 60FPS)
EDIT: This are residential enthusiast LPR cameras recording to my Synology Surveillance Station system.
My first trial at LPR failed badly
EmpireTech cameras for each direction of travel:
IPC-T54IR-ZE-S3 1/1.8 4MP image sensor 2.8-12mm lens
IPC-B54IR-Z4E-S3 1/1.8 4MP image sensor 8-32mm lens
Anyone have success with leaving 1/1.8 in color mode at night? If you have to run B&W infrared LEDs, what settings do you run differently than a 1/2.8 camera? What settings do you adjust differently with the larger sensor? (1/1.8 is such a superior camera image sensor, combined with a varifocal optical zoom lens is magnificent even if it can't do 60FPS)
EDIT: This are residential enthusiast LPR cameras recording to my Synology Surveillance Station system.
My first trial at LPR failed badly
Last edited: