bricked

Brought 2 x DS-2CD2532F-IS details below. Firmware - V5.3.0_150513 Build - 08/2015 Everything was working fine however when I downloaded and applied the most recent update V5.3.0_150814 from here I haven't been able to access them since. I am new to Hikvision so was unaware of all the issues...

Hi All, I have poured through the forums and tried everything I could find, but... I have a DS-2CD2532-IWS, manufactured 02/2015, and shipped with firmware V5.2.8_141231. It quit broadcasting yesterday and the web tool would not respond. It was connected via a router, so I attached it to my...

Does anyone know how to calculate a new checksum, if I have modified something (mtd5/mtd6)? And where is the calculated checksum saved/located? Thanks

eed some advice for a bricked HUACAM HCV712. When I first started putting in my camera system I bought Huacam because they were cheap. I believe they are Grandstream knockoffs. You get what you pay for and all but two have been replaced with HIKvision. The last two should be here in a couple...

I tried to downgrade the firmware from 5.2.5 to 5.2.0 which works fine on my other cameras but it bricked my Cube camera. the camera is 5.2.8, what I have done wrong and how I can bring it back to life. SADP cannot find the camera, and the IP before firmware downgrade is not working

I got a USB to TTL adapter at Sparkfun.com, about $10 and connected to a camera during bootup. For those interested, I got the JSP connector at the link below that plugs directly into the camera, so easy peasy. The wires coming out of the adapter are as follows, red is ground, black is RX...