Search results

ITS DONE!!!! upgrade from 5.3.0 to 5.4.0 was perfect (LOVE THE NEW GUI with 5.4.0)!!! Upgrade for 5.4.0 to 5.4.5 was also perfect!!! Now that I have mastered this on one camera I have 6 more to do. The key with the upgrade to 5.3.0 is the password lockout and you need to get the tool from...

found a fix at this post: Hikvision camera admin password reset tool the tool from GitHub managed to reset my password for me and then i was able to connect. Lets hope i don't get this again when i upgrade the firmware from 5.3.0 to 5.4.0 trying that now.

when i upgraded from 5.2.5 to 5.3.0 the camera would not let me log in at all. The old password i had set would not work and no mater what I try, it locks me out. I think I need to activate the camera now as its on 5.3.0 and i saw an article about the password reset requirement. Not sure why...

Thank you for your help I think i have successfully upgraded from 5.2.5 to 5.3.0 after making the changes. I have discovered a new challenge now as the admin account is locked out and it looks like on ver 5.3.0 the password changes and I need to go find a way now to recover it. Nothing is ever...

this will hopefully be my last question on this as I am at the final hurdle. I will include screen shots to help explain where I get stuck. Mtdblok6 - The checksum has me completely confused. Screen shot 'mdtbblock6 green = '0X10' to '0x01 this is ok red = i replace FF with 14 and 98 stays the...

thank you for the guide and I gave this a try but got stuck so I'm holding fast before proceeding. I think the road blocks I have may been down to tools as you suggest to use HxD and I am using iHex (Mac equivalent) tool for this. I don't think that should matter but it may be the reason why. I...

verifying my urls for firmware: 5.3.0 - Hangzhou Hikvision Digital Technology Co. Ltd. This says english and not multi language. Should I be looking for multi language over english? IPC_En_V5.3.0 150513 (2XX2) 5.4.0 - Hikvision USA same question as above around english or ML? (IPC -...

hi, i have seen your post and I plan to go ahead with it. Just a question on your guide. As i haven't done the upgrade yet I dont need to to the chinese to english hack at all right? Also, what part of your guide do I need to follow to allow the upgrade to occur without triggering the chinese...

Camera Model: DS-2CD2032-I Firmware version: V5.2.5 build 141201 encoding version: V5.0 build 140714 Just did some research and saw that my serial number has "CCCH" in it which means its a grey market. New the price was too good to be true. Anyway I have had these cameras for 2 years now and...

+1 same question

running isms-4200 on a pc. Does IVMS-4200 perform the functions of a decoding server or does it just connect to a physical device that performs that function? trying to figure out what I'm doing wrong as i can map the pc running isms as the decoding server but nothing is there to decode. I am...

anyone? am i suppose to have a seperate device for video decoding of can isms-4200 do this?

Three questions 1) IVMS 4200 Client VS IVM 4200 PCNVR please clarify the difference?? 2) IVMS-4200 Client Decoding Server How do you add the device and get it to work? I tried to set up the video wall but when I added the decoding server it would not find any devices. Am i suppose to start a...

fan is running at 1000rpm system cpu is at 70c. i have just turned all recording off and the cpu temp is now 63c. Cant say for sure if it was the cam's or me just cooling the room where my equipment is. what is other peoples experience with multiple cam's with continious recording. any cpu...

I have 7 HK 2032 bullets all connected to my readynas 104. working well so far but noticing my nas is getting hot in the system temp 70c. Not sure if this is normal but it doesn't seem it for me. Mu disk is around 40c but I'm not to flussed by that, its the system temp that scares me. It has...

fender man your right, its working much better now!! i removed all the port forwarding rules i had. i just changed the media port on the camera log in gui from 8000 to a unique port for each camera. Then i let UPnP do the rest of the config by itself. now it all works over wifi and 3g/4g...

Does IVMS only need the media port when it's coming from an NVR to the app. I'm not using a NVR its all going to a NAS

here is my port forward list. I modified cam 7 to your suggestion. Changed internal ports to default and changed external. Then i tried to do the same to Cam1 but it will not let me set the internal ports to 80, 554 or 8000 in the router port forward list as they are always in use now.

Netgear nighthawk modem&router

really struggling to find a setting that will do away with false alerts from shadows. using expert setting as normal does not allow enough flexibility to prevent the false alerts. I have tried moving the sensitivity to 1-15 to reduce the size of what can trigger it and the proportion to to 80...

tried keeping them on the default internal port and then specifying an external port the was unique in the port forward table. Router wouldn't let me do it as it kept telling me the port was already in use e.g.: CAM1 IP -> internal port 8000 to external port 8945 works for one camera but once i...

log into your cameras and change the default ports used for http, RTSP and server. eg: http is set to 80 change it to something else that isn't being used. do the same for RTSP and Server (8000) then log into your router and go to port forwarding. Enter the IP of the camera (make sure its a...

I can use IVM-420 to i set up a stream from the nas. might be a silly question or one i can answer me self with some reading material. If you can point me in the right direction ill find my way. Was also thinking of installing the flex movie played add on for my readynas but not sure if that...

I have 7 hikvision cameras. i have them connected to my POE smart switch. From the smart switch I have a NAS connected. I am currently setting the cameras up to record to my readynas. Will this setup allow me to record to my NAS and then view playback remotely with the mobile app IVM-4500 or do...

latest development almost all cameras are working. Logged into cameras via IP. Checked the nat section for the port map table, any cameras that has automatically assigned a different IP to the section seems to work: eg: If the port is set to 8000 but the NAT menu port map state 8079 then its...

ok so i think this is definetly a routing issue as some of you have suggested. I can only get 2 cameras at a time to work on cellular and I think it may be related to UPnP config. If i turn UPnP off and back some not all of my cameras appear in the port map list of devices registering in UPnP...

here is a screen shot of my mobile phone. in the image you can see the two bottom cameras working over 3g/4g. the other cameras time out. in the IVMS-4500 iphone app they time out with the error code "340406". one camera on my porch times out with error code "340016"

The two cameras that are working have no additional config in place just like the other 5. No additional port config. Makes no sense to port forward when two work but others don't. Happy to give it a try though as I want this to work :)

Will check the ports to see which is open tonight. Yesterday I connected 3 more cameras. Two cameras are WORKING over 3G and 4G. They load quickly in the app while all other cameras buffer and time out once it's loaded to 80 or 90%. They are exactly the same cameras as my others and the 3rd...

anyone figure this out yet??? i have the same issue. 7 cameras all connected and working perfectly over wifi. The second i use cellular data the images load to 93% and them time out. This occurs in both the ezviz and ivms iPhone app. I am in australia on the boost mobile network which runs...