Search results

  1. C

    Hikvision access control acting up

    hello i have around 25 Hikvision DS-K1T341CMF - Face Recognition Terminals connected to an IVMS 4200-AC (all have latest firmware) I have created an access group and joined all together to have all the employee credentials (photo and fingerprint) on all devices IT is working good except for few...
  2. C

    Damaged POE switches

    Hello I am seeing a large number of non working Hikvision poe switches with the same pattern of Led What does this indicate ? surge issue ? Thank you
  3. C

    NVR to rear view mirror

    i had the exact same idea .. a screen .. i will see what to do
  4. C

    NVR to rear view mirror

    HDMI/VGA simultaneous output would something like a converter work ?
  5. C

    NVR to rear view mirror

    hello the lag is minimal and it wont be used as a reverse cam , it is just so the driver can see whats behind him if needed
  6. C

    NVR to rear view mirror

    hello i have few limousines with a hikvision nvr and cameras , i would like to connect the rear cam to the read view mirror I am only finding mirrors that connect dvr any advice please ?
  7. C

    POE-max Led

    i am working remotely , sent someone on the site and switches has no poe max !! and this spec sheet give this 60 watt of power budget , this is why it works usually spec
  8. C

    POE-max Led

    i rechecked , i have 3 poe switched daisy chained , with these power : 45 Watt max , 58.5 watt max and 51.8 watt max .. i believe the 58.5 might be struggling to cope
  9. C

    POE-max Led

    one cable to an access point ( no poe ) one cable coming from another switch ( i have them in daisy chain ) and 6 cameras DS-2CD1043G0-I - - PoE: (802.3af, 36 V to 57 V), 0.2 A to 0.15 A, max. 6.5 W so less than 40 watt no ?
  10. C

    POE-max Led

    Hello i am trying to find some details on the POE-Max led on hikvision poe switch but not being able to find any I am having too much disconnections using DS-3E0109P-E/M(B) 8 port poe switch and I suspect my runs are too long or the poe charge is too high what does this led do or mean ?
  11. C

    cameras network not working

    one of the cameras was bitten by the rat .. fixed it the others still checking
  12. C

    cameras network not working

    i have around 7 ds-2cd1043g0-i that are not working first they work normally for few days , they are activated , updated , etc .. then only the poe works without network ( no ping , no stream ,no SADP ) if i connect directly to my pc while using external power adapter , the infrared leds turn...
  13. C

    hikvision nvr needs reboot to function

    hello I have around 50 cameras connected to an old 128 port nvr (DS-96128NI-E16/H) with a firmware of 3.0.4 build 150616. if a poe switch disconnect for a minute ( power outage per example ) , the cameras will stay offline until i reboot the nvr what do you think i can do ?!
  14. C

    HIKVISION random connection loss (only power reset helps)

    hello I have very close problem around 50 cameras connected to an old 128 port nvr (DS-96128NI-E16/H) with a firmware of 3.0.4 build 150616 if a poe switch disconnect for a minute ( power outage per example ) , the cameras will stay offline until i reboot the nvr what do you think i can do ?!
  15. C

    increasing camera number in NVR

    i thought so , thank you paul
  16. C

    increasing camera number in NVR

    hello I have a 16 ports Hikvision NVR. lets imagine this scenario : the 16 ports hikvision nvr is connected via lan to a 24 ports POE switch . this 24 ports POE switch is connected to 20 Hikvision ip cameras. all cameras are turned on would the the 16 ports Hikvision NVR be able to view the 20...
Top Bottom